Philips NeoPix Ultra One plus Home Projector User Guide
- June 10, 2024
- Philips
Table of Contents
Philips NeoPix Ultra One plus Home Projector
Product Information
The NeoPix Ultra One+ Home projector is a product of Screeneo Innovation SA, located in Tolochenaz, Switzerland. It is a registered trademark of Koninklijke Philips N.V. and is used under license. The projector features multiple input sources, such as VGA, AV, HDMI 1, HDMI 2, USB, and microSD. The product comes with a remote control for easy operation and has a standby/on- off button. It also has an adjustment knob and keys for easy navigation and selection of input sources. The projector is compatible with Android TV and has Google Assistant for voice control.
Product Usage Instructions
- Connect the projector to a power source using the DC cable.
- Select the input source by using the keys on the remote control or the adjustment knob on the projector. The available input sources are VGA, AV, HDMI 1, HDMI 2, USB, and microSD.
- If connecting a phone or tablet to the projector using HDMI, use one of the following methods:
- Connect the phone/tablet to the projector using an HDMI cable.
- Connect the phone/tablet to the projector using a USB-C to HDMI adapter and an HDMI cable.
- Connect the phone/tablet to the projector using a USB-C to HDMI cable.
- To turn on/off the projector, use the standby/on-off button on the remote control.
- To adjust the focus of the image, use the adjustment knob on the projector.
- To correct any keystone distortion in the image, press and hold the keystone button on the remote control for 2 seconds.
- The projector is also compatible with Android TV. Use the Android TV dongle remote control to navigate and select options on the Android TV interface.
- The projector also has a built-in Bluetooth speaker for wireless audio playback.
- For further support, download the full user manual from www.philips.com/support and register your product.
Download the full user manual at: www.philips.com/support and register your product for further support
IN THE BOX
REMOTE CELL Connection
Power
On Focus
Keystone
HOW TO PLUG IN
WARNING
Adjustment knob
Keys
Android TV Dongle remote control
Android TV Navigation
Projector remote control
Access to Android TV
Bluetooth speaker
Connecting phones/tablets to HDMI
FCC ID :2ASRT-NPX646
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Screeneo Innovation SA
Route de Lully 5C
1131 – Tolochenaz – Switzerland
www.philips.com/welcome
[email protected]
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke
Philips N.V. and are used under license. Screeneo Innovation SA is the
warrantor in relation to the product with which this booklet was packaged.
2022 © Screeneo Innovation SA
All right reserved