Just Mobile ST-5XX AluDisc Magnetic Series Instructions

Just Mobile ST-5XX AluDisc Magnetic Series

Instruction Sheet

Notes:

1. Each device (phone/tablet) will require its own metal ring/pad.

2. iPhone in a Mag Safe case will still require its own metal ring.

3. Phone case with a thickness of 2.5mm or less will perform the best. The thinner the case, the stronger the magnetic adhesion.
   P.S. Phone case material, glossiness, and thickness will affect magnetic adhesion.

4. For tablets, install the metal pad on the outside of the case. If installed on the inside, the magnetic attraction will be weaker.

5. When using Apple Mag Safe Charger, be sure to use the shielding patch (available at: just-mobile.com).

Scan the QR code
to view the installation video

Metal Ring For phone

1. Clean the surface with the wet wipe.
   

2. Align the template on the back of the phone so that the ruler numbers match on opposite edges.
   

3. Remove the liner to reveal the adhesive.
   

4. Place the metal ring within the template circle.
   Press evenly and wait for 24 hours before use.
   

5. Put on a protective case. Install complete.
   

Metal Pad For tablet

1. Clean the surface with the alcohol wipe.
2. Remove the liner to reveal the adhesive.
3. Place the metal pad at the center of the back of the tablet. Press evenly and wait for 24 hours before use.
4. Install complete.
   
    For tablets, affix the metal pad on the outside of the case. If installed on the inside, the magnetic attraction will be weaker.

AluDisc™ Pro/Max

1. Screw in to assemble the base with the post.
   

2. Screw on the rotating head.
   

3. Adjust the height.
   

4. Snap on the phone/tablet.
    Press/hold the base when removing.
   

AluDisc™ Go

Installing the dashboard base

1. Identify desired mounting position on dashboard.
   

2. Clean the surface with the wet wipe.
   

3. Remove the liner to reveal the adhesive.
   

4. Press base FIRMLY for 5 seconds and wait 24 hours before use.
   

5. Screw on the rotating head.
   

6. Snap on the device.
    Press/hold the dashboard base when rotating.
   

Installing the vent insert

1. Screw on the rotating head, and insert into vent.
   

2. Snap on the device.
   

AluDisc™ mini

1. Clean the surface with the wet wipe.
   

2. Remove the liner to reveal the adhesive.
   

3. Press base FIRMLY for 5 seconds and wait 24 hours before use.
   

4. Snap on the device.
   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>