ET2 E21180-142GM Highball LED Wall Sconce User Guide
- September 27, 2024
- ET2
Table of Contents
ET2 E21180-142GM Highball LED Wall Sconce
Specifications:
- Item / Model Number : E21180-142GM Highball LED Wall Sconce
- 1 x 10W LED (Included)
- Dimensions : 2.55L x 1.18W x 0.9H
Product Usage Instructions
Assembly and Installation:
- Read the instructions carefully before assembling the product.
- Choose a clean, level, and spacious assembly area to avoid damaging the product.
- Ensure you have all the required contents for complete assembly.
- Assemble the product near where you intend to install it.
- Avoid overtightening screws and bolts to prevent damage.
- Disconnect from the power source before assembling or cleaning.
- Switch off, unplug, and allow the bulb to cool before replacing it or cleaning it.
Cleaning and Maintenance:
- Use a clean, soft cloth with mild detergent for cleaning. Avoid abrasive cleaners.
- For polished finishes, use talc powder to reduce fingerprints and smudges.
- Use appropriate cleaners for respective shade surfaces (glass cleaner, stone polish, wood polish).
- Periodically check and tighten screws every 90-180 days.
- Avoid prolonged exposure to heat sources to prevent damage.
Before Getting Started
- Read the instructions carefully before assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain them for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all the required contents for complete assembly.
- Take care when lifting. Assemble the producer to where you intend to install it.
- Do not overtighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Risk of suffocation! Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the product.
Caution there is a risk of shock!
Disconnect from the power source assembling cleaning. Switch off, unplug, and
allow the bulb to cool before replacing the bulb or cleaning. Only use the
recommended bulb type and do not exceed the maximum wattage as it could cause
fire. Check the product cord to be sure is free of tan or frayed.
WARNING : Wires must be connected to the voltage driver and should connected directly to the live wire or a short may occur.
Cleaning & Maintenance
- On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, store polish, & wood polish.
- Clean with a soft cloth and a mild detergent Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause, melting and scoring, or even cause colonnade.
PARTS
Before getting, started, ensure the package contains the following components:
This fixture is equipped with an LED driver, please refer to the Wiring Diagram for more details
WIRING DIAGRAM
DIMMER COMPATIBILITY
MUST be installed by an experienced professional CRITICAL KNOWLEDGE of
electronic lighting systems required
IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
- THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
- DO NOT CUT FACTORY-MADE CONNECTIONS.
VERIFIED LIST OF TESTED DIMMERS
- Lutron Diva DVCL-153P
- Lutron Diva DVELV-300P
- Lutron Diva Caseta PD-6WCL
- Lutron Maestro MACL-153M
- DEAKO-Smart Dimmer
- DEAKO-Single Dimmer
- LEVITON 6672-L
- LEVITON DSL06
GENERAL COMPATIBILITY
- TRIAC / FORWARD PHASE
- ELV / REVERSE PHASE
- Only at 120VAC
- Due to inrush current, wattage should not exceeed 150W on a 600W dimmer
IMPORTANT!
If the control is not paired properly to LED fixtures, irreparable damage may
occur. If the dimmer you are using is not listed here, consult a lighting
professional or view our
Dimming Compatibility Chart online: www.et2online.com/led- dimmer
MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lighting systems required
© 2024 ET2 CONTEMPORARY LIGHTING
FAQ
Q: Can children play with this product?
A: No, children should not play with this product. Keep packaging materials
and hardware out of reach of children.
Q: How often should I tighten the screws?
A: It is recommended to check and fully tighten the screws every 90-180
days to ensure stability.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>