200310 SOG II Type 3000A Kit for Dometic CT3000 or CT4000 Instruction Manual
- June 9, 2024
- SOG
Table of Contents
200310 SOG II Type 3000A Kit for Dometic CT3000 or CT4000
Product Information
- The product uses technology instead of chemicals for its operation. It has a cassette-based system for waste management and requires filter replacement every year for optimal performance. The product comes in three versions: door, floor, and roof.
Product Usage Instructions
- Before removing the cassette, make sure to pull off the hose from the green hose connector. Then, attach the black plug to the hose connector (green) before pulling out the cassette and disposing of it appropriately. To insert a new cassette, pull off the plug (black) and attach the extractor hose to the hose connector (green). For a second cassette change, you can store the full cassette in the storage space for several days.
- For the door version, change the filter once a year by unscrewing the 2 crosshead screws at the bottom. Push the cover cap up and remove it from the front. Take out the filter and insert a new filter into the existing fitting. Place the cover on top and push it downwards to lock it into place. Screw in screws and tighten slightly while applying light pressure on the cover.
- For the floor version, before changing the filter, pull out the fan from the rubber sleeve in the filter housing. Twist and turn the filter cartridge before pulling it upwards and out. Insert the new filter cartridge into the pipe and moisten the rubber sleeve before inserting the fan into the filter cartridge. Twist and turn the fan while inserting it as far as it goes.
- If you have a roof version, it is maintenance-free.
Operating and Maintenance Instructions
- Before removing the cassette, the hose must be pulled off the green hose connector
- Attach the black plug to the hose connector (green). Pull out the cassette and dispose of it appropriately
- Insert the cassette, pull off the plug (black), and attach the extractor hose to the hose connector (green).
- If you want to change a second cassette, then you can carry the full cassette in the storage space for several days. (There is no longer any gasformation if the cassette is full)
- Only by door version: Change the filter once a year!
- Completely unscrew the 2 crosshead screws at the bottom.
- Push the cover cap up a little and remove it at the front.
- Take out the filter and insert a new filter into the existing fitting.
- Place the cover on the top – pull it forward slightly at the bottom. Push the cover from top to bottom so that it locks into place. Screw in screws ① and tighten slightly. Apply light pressure on the cover while doing so.
- Before changing the filter, pull the fan out of the rubber sleeve in the filter housing.
- Since the filter cartridge push-fits into the pipe, twist it back and forth while pulling it upwards and out.
- Insert the new filter cartridge into the pipe.
- You must moisten the rubber sleeve before inserting the fan into the filter cartridge.
- Insert the fan as far as it goes, twisting it back and forth.
By roof version: maintenance-free
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>