ATAEFR B0C48RN9L3 Floor Lamps for Living Room with Remote User Guide

ATAEFR B0C48RN9L3 Floor Lamps for Living Room with Remote

BEFORE USE

Thank you so much for choosing our product. Please read this manual carefully before use. We make every effort to ensure good quality, but in case of insufficient quantity, dirty or damaged product, or malfunction of use, please contct us, we will replace for you or refund you immediately

WARRANTY

If any problem on this product, please feel free to contact us. We will do our best to provide you with the best products and the highest standard of customer service.

1. We promise 1 year warranty from the date of purchase. If any product defection occurs during normal use, we will repair or refund or replace the product at our discretion. Be sure to check the product within 30 days of purchase.
2. Damage caused by drop, impact or external factors is not covered by the warranty.
3. When purchased by transfer, second-hand sale, auction, resale, etc., it cannot be exchanged.

CONTACT DETAILS

1. Access the order history and click the button to contact the seller.
2. On the product details page, click the seller’s name displayed below the stock status. Click the Ask a Question button on the seller’s page.
3. If you have any question, please contact us via Amazon or Contact us at winlenfly@gmail.com

Important Note

1. The working range of remote control is 20 meters.
2. 2* AAA batteries are required for the remote control(Not included).
3. If you don’t use it for a long time, please take out of the batteries.

Warning & Cautions

1. Place the lamp on a flat and horizontal surface.
2. To avoid the breakdown, short circuit, please do not place the lamp in a hot or humid environment.
3. Do not look directly into the light beam.
4. Do not attempt to open, repair or replace any part of the lamp. This includes all components, power supply and electric cable.
5. Do not cover the lamp with flammable material.
6. Do not spray any liquid on the lamp.

ASSEMBLY

1. Place the lamp base on flat surface, then connect it with the pole.
2. Screw the four tubes tightly.
3. Place the protection plate (lower) on the socket and fix it with the retaining ring.
4. Screw the LED bulb into the bulb base.
5. Install the linen lampshade on the protection plate (upper).
6. Install the lampshade, and stick the velcro closure flatly.

Note: Do not touch the light when it is on. (There is a risk of accidents such as burns.)

Foot switch function

1. Shutdown state, the first short press on the key to light up, white light on; the second short press off, the third short press on the light switch to warm white light; the fourth short press to switch off, the fifth short press to switch to warm light, the sixth short press to switch off, the seventh short press to switch to white light, and so on.
2. Switch on, switch light colour: white – warm white- warm, and so on.

What’s in the Box

SPECIFICATIONS

Voltage: AC100V-240V| Color temperature: 2700k

/4500k/6500k

---|---
Frequency: 50/60HZ| Total luminous flux: Max.800lm
Power consumption: 12W| Lampshade material: Cotton and linen

REMOTE CONTROL FUNCTION (within 20M)

Long press for stepless dimming

How to connect the remote and the light

1. Turn on the light
2. Within 3 seconds after the light is on, press and hold the power button of the remote control for about 6 seconds, the light will flash once.
3. Connection completed

Please finish this within minute

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>