Teltonika FMM125 Versatile 4G LTE Cat M1 Tracker For Car Telematics User Manual

Teltonika FMM125 Versatile 4G LTE Cat M1 Tracker For Car Telematics

Specifications

• EYE Beacon: BLE Beacon for traceability use cases, delivery tracking, and monitoring of various movable objects in logistics, agriculture, and construction.
• EYE Sensor: Suitable for cold chain refrigerator use cases with built-in accelerometer and magnet detection.
• LV-CAN200: Access to CAN Bus data for fleet operators to report on essential parameters like fuel level, odometer, VIN, etc.
• ALL-CAN300: Communication network for reducing running costs, improving driver safety, and supporting environmental responsibility.
• CAN-CONTROL: Lock/unlock the car remotely and control windows using SMS/GPRS commands.
• ECAN01: Contactless connection to the CAN bus of the vehicle for reading data without damaging wires.
• Analog Fuel Sensor: Solution for fuel tracking challenges in fleet management with factory-installed sensor compatibility.
• 1-Wire Temperature Sensor: Enables temperature tracking in various applications.
• 1-Wire iButton Reader: Perfect for AVL data traveling along withthe  person or object identification.
• 1-Wire RFID Reader: Driver authentication solution using RFID technology.

Product Usage Instructions

https://wiki.teltonika-gps.com/view/FMM125_Accessories

FMM125 Accessories
Main Page > Professional Trackers > FMM125 > FMM125 Manual > FMM125 Accessories

• EYE Beacon
  BLE Beacon for traceability use cases, delivery tracking, monitoring of various movable objects in logistics (trailers, containers), agriculture (tractor attachments), and constructions (tools and inventory).

• EYE Sensor
  Sensors data makes it especially suitable for cold chain refrigerator use cases. The built-in accelerometer can detect item movement or fall events. Magnet detection can be used for wireless open/close detection and notifications such as trailer door events, etc.

• LV-CAN200
  Access to CAN Bus data enables fleet operators to report on a wide range of information. LVCAN200 adapter lets you read such essential CAN parameters like: fuel level, odometer, VIN number, fuel consumption, engine RPM, engine temperature and handbrake status. It helps to identify areas of improvement in the vehicle operation to drive down overheads and minimize environmental impact.

• ALL-CAN300
  Communication network can provide you with a wide range of data that can be used to reduce running costs, improve driver safety, streamline maintenance processes and support environmental responsibility.

• CAN-CONTROL
  The most widely used feature of CAN-CONTROL device is the possibility to lock/unlock car remotely and control its windows by using special SMS/GPRS commands. It makes CAN- CONTROL accessory a perfect solution for car sharing and many other use cases.

• ECAN01
  Contactless connection to the CAN bus of the vehicle! It reads can bus data through the isolation of wires without damaging them and forwards signals to tracking device.

• Analog Fuel Sensor
  Fuel tracking is one of the key challenges of fleet management. If the vehicle has a factory installed Analog Fuel Sensor, there is a solution that does not require any additional equipment – you can connect the device via AIN to read the fuel data straight from the sensor

• 1-Wire Temperature Sensor
  SensorDigital temperature sensor probe is based on Dallas DS18B20 sensor. An 8 meter cable length will not require any additional wires for even the most demanding installation places. These sensors operate in wide temperature range from -55°C to 125°C.

• 1-Wire TTJ Temperature Sensor
  The TTJ communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of –55°C to +125°C and is accurate to ±0,5°C over the range of –10°C to +85°C.

• 1-Wire iButton Reader
  One of the implemented features for fleet management devices is 1-Wire data protocol, which enables connection of iButton. The iButton device is perfect for any application where AVL data needs to travel along with a person or object identification.

• 1-Wire RFID Reader
  The easy solution for implementing driver authentication using RFID based on DS1990A. Read is able to receive identification data wirelessly from passive transponders (cards, tags, etc.)

FAQ

Q: Can the Analog Fuel Sensor be used with any vehicle?
A: The Analog Fuel Sensor can be used with vehicles that have a factory- installed compatible sensor. Ensure proper connection via AIN for accurate fuel data reading.

Q: How does the 1-Wire iButton Reader work?
A: The 1-Wire iButton Reader enables the connection of Button devices for a person or object identification. Implement this feature where AVL data needs to travel along with identification data.

Q: What is the primary function of the 1-Wire RFID Reader?
A: The 1-Wire RFID Reader is used for driver authentication using RFID technology. It wirelessly receives identification data from passive transponders like cards or tags.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>