TELTONIKA TSW304 DIN Rail Switch Owner’s Manual
- May 15, 2024
- teltonika
Table of Contents
TELTONIKA TSW304 DIN Rail Switch
HARDWARE
FRONT VIEW
BACK VIEW
RJ45 LED MEANING
FEATURES
ETHERNET
LAN| 4 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossover
IEEE 802.3 series standards| 802.3i, 802.3u, 802.3ab, 802.3x, 802.3az, 802.3ad
PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking)| 8 Gbps
Packer buffer| 128 KB
MAC address table size| 2K entries
Jumbo frame support| 9216 bytes
POWER
Connector| 2-pin industrial DC power socket
Input voltage range| 7 – 57 VDC; 9 – 40 VAC
PoE (passive)| Possibility to power up through ETH1 ports, not compatible with
IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 30 VDC
Power consumption| 1 x 2-pin industrial DC power socket
Other| 1 x Grounding screw
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet| 4 x RJ45 ports, 10/100/1000 Mbps
Status LEDs| 8 x LAN status LEDs, 1 x Power LED
Power| 1 x 2-pin industrial DC power socket
Other| 1 x Grounding screw
PHYSICAL SPECIFICATION
Casing material| Aluminum housing
Dimensions (W x H x D)| 102 x 25 x 81.5 mm
Weight| 210 g
Mounting options| DIN rail or wall mounting
OPERATING ENVIRONMENT
Operating temperature| -40 °C to 75 °C
Operating humidity| 10% to 90% non-condensing
Ingress Protection Rating| IP30
CERTIFICATION & APPROVALS
Regulatory| CE, REACH, RoHS, WEEE, UKCA, FCC, IC, CB, RCM
SAFETY
Standards| EN IEC 62368-1:2020+A11:2020
WHAT’S IN THE BOX?
STANDARD PACKAGE CONTAINS
- TSW304
- QSG (Quick Start Guide)
- Packaging box
STANDARD ORDER CODES
| PRODUCT CODE | HS CODE | HTS CODE | PACKAGE CONTAINS |
|---|---|---|---|
| TSW304 00B000 | 851762 | 8517.62.00 | Standard package |
For more information on all available packaging options – please contact us directly.
TSW304 SPATIAL MEASUREMENTS & WEIGHT
MAIN MEASUREMENTS
W x H x D dimensions for TSW304:
*Device housing: 102 x 25 x 81.5 mm
Box:** 173 x 71 x 148 mm
TOP VIEW
The figure below depicts the measurements of TSW304 and its components as seen from the top:
RIGHT VIEW
The figure below depicts the measurements of TSW304 and its components as seen from the right side:
FRONT VIEW
The figure below depicts the measurements of TSW304 and its components as seen from the front panel side:
REAR VIEW
The figure below depicts the measurements of TSW304 and its components as seen from the back panel side:
MOUNTING SPACE REQUIREMENTS
The figure below depicts an approximation of the device’s dimensions when cables and antennas are attached:
DIN RAIL
The scheme below depicts protrusion measurements of an attached DIN Rail:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>