TELTONIKA TSW101 Automotive Industrial Unmanaged POE+ Switch User Guide
- October 30, 2023
- teltonika
Table of Contents
TELTONIKA TSW101 Automotive Industrial Unmanaged POE+ Switch
Product Information
The TSW101 is a network switch designed for small to medium-sized businesses. It is equipped with 5 PoE-powered Ethernet ports and a power socket for easy installation. The switch supports a maximum power budget of 60W, making it ideal for powering PoE devices such as IP cameras, wireless access points, and VoIP phones. The TSW101 also features a grounding screw for added safety.
Technical Specifications
- Input voltage range: 100-240V AC
- Max power consumption with no PoE devices connected: 1.5W
- Max PoE power budget at PSE: 60W
- Max Ethernet cable length: 100m
Product Usage Instructions
- Connect one end of an Ethernet cable to one of the five Ethernet ports on the front of the switch.
- Connect the other end of the Ethernet cable to a device that requires network connectivity, such as a computer or IP camera.
- If you need to power a PoE device, connect it to one of the PoE-powered Ethernet ports on the front of the switch.
- If you need to connect the switch to a power source, plug in the power cord to the power socket on the front of the switch.
- Use an Ethernet cable to connect the switch to your network or internet connection.
- If necessary, use the grounding screw on the back of the switch to ground the device for added safety.
- The Power LED on the front of the switch will light up when the device is powered on.
FRONT VIEW
BACK VIEW
POWER SOCKET PINOUT
RJ45 LED MEANING
TECHNICAL INFORMATION
Technical specifications
Input voltage range| 9 – 30 VDC
Max power consumption no PoE devices connected| <2.2 W
Max PoE power budget at PSE*| 60 W
Max Ethernet cable length| 100 m
Depends on the connected power source. (30 W (max.) @ 12 VDC for total PD consumption; 30 W (max.) for each PoE port ; 60 W (max.) @ 24 VDC for total PD consumption; 30 W (max.) for each PoE port).
HARDWARE INSTALLATION
- Connect your main internet router/modem to TSW101 LAN port number 5.
- Connect end devices (ex. IP camera) to TSW101 1 to 4 port, which you want to power via Ethernet.
- Connect the 2-pin power plug to TSW101 to power up the switch.
SAFETY INFORMATION
TSW101 switch must be used in compliance with any and all applicable national
and international laws and with any special restrictions regulating the
utilization of the communication module in prescribed applications and
environments. Hereby, TELTONIKA NETWORKS declares that this TSW101 is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/30/EU and 2014/35/EU. The full text of the EU Declaration of
Conformity is available at the following Internet address: https://wiki
.teltonika-networks.com/view/TSW101_CE.
Instruction Manual: Connect the power adapter to turn on the device. More
information on https://wiki.teltonika-networks.com/. This sign means that
all used electronic and electric equipment should not be mixed with general
household waste. This sign means that the product meets the requirements of
the applicable EU directives. www.teltonika-networks.com. 2022 Teltonika Networks
Wiki knowledge base: https://wiki.teltonika-networks.com/.
References
- Teltonika Networks - LTE Routers, Gateways & Modems for IoT
- wiki.teltonika-networks.com
- wiki.teltonika-networks.com/
- wiki.teltonika-networks.com/view/TSW101_CE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>