TELTONIKA TSW200 Industrial Unmanaged PoE Ethernet Switch User Guide

TELTONIKA TSW200 Industrial Unmanaged PoE Ethernet

TSW200 Quick Start Guide v1.0

The TSW200 is a network switch that allows you to connect multiple devices to your internet router/modem and power them via Ethernet. It has 8 SFP ports, 2 PoE Out SFP ports, and 2 Ethernet ports. The switch has a maximum PoE power budget of 240W and can support a maximum Ethernet cable length of 100m.

Technical Specifications

• Input voltage range*:

• Max power consumption no PoE devices connected: 5.5 W

• Max PoE power budget at PSE: 240 W

• Max Ethernet cable length: 100 m

• Bundled accessories specifications**: No accessories

• PoE operates properly only when connected power supply outputs 44 V or higher voltage. ** Order code dependent.

Hardware Installation

1. Connect your main internet router/modem to TSW200.
2. Connect end devices (ex. IP camera) to TSW200 1 to 8 port, which you want to power via Ethernet.
3. Connect 2 pin power plug to TSW200 to power up switch.

Safety Information

The TSW200 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments. This sign means that all used electronic and electric equipment should not be mixed with general household waste. This sign means that product meets the requirements of the applicable EU directives. The full text of the EU declaration of conformity is available at the following Internet address:
https://wiki.teltonika-networks.com/view/TSW200_CE

https://wiki.teltonika-networks.com/

FRONT VIEW

BACK VIEW

POWER SOCKET PINOUT

RJ45 LED MEANING

TECHNICAL INFORMATION

Technical specifications

Input voltage range*| 7 – 57 VDC
Max power consumption no PoE devices connected| 5.5 W
Max PoE power budget at PSE| 240 W
Max Ethernet cable length| 100 m
Bundled accessories specifications**
No accessories

• PoE operates properly only when connected power supply outputs 44 V or higher voltage.
• Order code dependent.

HARDWARE INSTALLATION

1. Connect your main internet router/modem to TSW200.
2. Connect end devices (ex. IP camera) to TSW200 1 to 8 port, which you want to power via Ethernet.
3. Connect 2 pin power plug to TSW200 to power up switch

SAFETY INFORMATION

TSW200 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.

Hereby, TELTONIKA NETWORKS declares that this TSW100 is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU and 2014/35/EU.

The full text of the EU declaration of conformity is available at the following Internet address: https://wiki.teltonika- networks.com/view/TSW100_CE

Instruction Manual: Connect the power adapter to turn on the device. More information on https://wiki.teltonika-networks.com/

This sign means that all used electronic and electric equipment should not be mixed with general household waste.
This sign means that product meets the requirements of the applicable EU directives.
www.teltonika-networks.com
2021 Teltonika Networks

References

• Teltonika Networks - LTE Routers, Gateways & Modems for IoT
• wiki.teltonika-networks.com
• wiki.teltonika-networks.com/
• wiki.teltonika-networks.com/view/TSW200_CE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>