LIMENTE 67019 Wireless Charger Instruction Manual
- October 30, 2023
- LIMENTE
Table of Contents
67019 Wireless Charger
Product Information
The product comes with a USB A and USB Micro-B interface. It has a maintenance process that needs to be followed for proper functioning. The product is compliant with WEEE regulations and has safety instructions that must be read before usage.
Product Usage Instructions:
- Read the safety instructions before using the product.
- Connect the USB A or USB Micro-B interface to the compatible device.
- Follow the maintenance process for optimal performance of the product.
Note: The product is compliant with WEEE regulations and must be disposed of properly.
Manual & Instructions
Safety Instructions
- Do not store the charger in cold temperature or in high temperature.
- Do not keep it directly under the sunlight or near fire or another harsh environment. Cold and High temperatures may damage the device.
- Do not use the device in wet or high humidity areas. Never use the device if it is damaged or wet. If the charger gets wet, disconnect it and allow the device to dry completely.
- Do not use or put the device in dusty or dirty areas.
- Do not attempt to open or repair the device yourself.
- Avoid rough handling, strong shocks or impacts.
- Do not place the phone, battery or other electronic products without the receiver on the charging base.
ATTENTION
Detecting external metal object
Do not put external metal object on the VersaCharger. In case of existence an
external metal object between the VersaCharger and the device, there is a risk
of damage for both. If accidentally, there was an external metal object
between them, remove the device and metal object quickly and do not use the
VersaCharger for 2 minutes.
CONTENTS
- During the charging process, it is normal for device and the charger to heat up. The charger will keep the temperature below 40 ° C or 105 ° F. If it exceeds, the charger stops and when the temperature returned to normal, the charge will be restarted.
- In case of short circuit in rechargeable device, the versacharger stops working. When the device was removed, the versacharger will return to the normal operation.
- When the device output current is higher than 1.1A, the versacharger stops working, and it will return to the normal operation when the device was removed.
- The charging time may vary depending on the device battery capacity, battery lifetime, level of charge and the temperature of the surrounding environment.
MAINTENANCE
- Clean the device with a soft dry cloth.
- Unplug the charger from the power source before cleaning.
- No service or maintenance is required.
- Do not attempt to disassemble the device or the warranty may be voided.
WEEE
Waste of electric and electronic equipment
Products must be recycled properly and should not be disposed as household waste. Disposal in general household waste is prohibited.
SPECIFICATIONS
- Wireless charging standard: Compatible
- Operating environment: Indoor, dry
- Operating temperature: 0°C~40°C
- Storage temperature: -20°C~75°C
- Humidity: 10% ~ 70%
- Storage Humidity: 10% ~ 80%
- Input: DC 5V / DC 9V – 2A
- Output: DC 5V / DC 9V – 1.1A
- Total output power: 10 W
The contents of this manual are for informational purposes only. All product dimensions and specifications are subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>