TELTONIKA TSW110 Layer 2 Unmanaged Switch User Guide
- October 30, 2023
- teltonika
Table of Contents
TSW110 Layer 2 Unmanaged Switch
User Guide
TSW110 Layer 2 Unmanaged Switch
Wiki knowledge basehttps://wiki.teltonika-networks.com/
TECHNICAL INFORMATION
Technical specifications
Input voltage range| 9 – 30 VDC
Max power consumption| <1.8 W
**Bundled accessories specifications***
Power adapter| Input: 0.4 A @100-240 VAC, Output: 9 VDC, 1 A, 4 pin plug
HARDWARE INSTALLATION
- Connect your main internet router/modem to TSW110 LAN port number 1.
- Connect end devices (ex. Industrial PC, printers, IP phones, laptops) to TSW110 2 to 5 port.
- Connect 4 pin power plug to TSW110 to power up switch.
SAFETY INFORMATION
TSW110 switch must be used in compliance with any and all applicable national
and international laws and with any special restrictions regulating the
utilization of the communication module in prescribed applications and
environments.
Hereby, TELTONIKA NETWORKS declares that this TSW110 is in compliance with the
essential requirements and other relevant provisions of Directive 2014/30/EU
and 2014/35/EU.
The full text of the EU declaration of conformity is available at the
following Internet address: https://wiki.teltonika-
networks.com/view/TSW110_CE
Instruction Manual: Connect the power adapter to turn on the device. More
information on https://wiki.teltonika-networks.com/
This sign means that all used electronic and electric equipment should not be
mixed with general household waste.
**** This sign means that product meets the requirements of the applicable EU
directives.
www.teltonika-networks.com
2021 Teltonika Networks
Documents / Resources
|
TELTONIKA TSW110 Layer 2 Unmanaged
Switch
[pdf] User Guide
TSW110, TSW110 Layer 2 Unmanaged Switch, TSW110 Unmanaged Switch, Layer 2
Unmanaged Switch, Unmanaged Switch, Layer Unmanaged Switch, Switch
---|---
References
- Teltonika Networks - LTE Routers, Gateways & Modems for IoT
- wiki.teltonika-networks.com
- wiki.teltonika-networks.com/