RiFF TL 4000 MK2 Dive Light User Manual
- June 17, 2024
- RiFF
Table of Contents
TL 4000 MK2 Dive Light
User Manual
Specifications:
- Bulb: White (video light) CREE XPG3-S5 * 8 (max 2600 lumens); White (spot light) CREE XPG3S5 2 ( max 1200 Iumens)
- Color temperature: White (video light) 5000-5500K, White (spot light) 6500K
- Output levels: 100%, 50% for both video and spot lights
- Runtime: White (video light) 100% 90 min, 50% 150 min; White (spot light) 100% 150 min, 50%240min
- Reflector: glossy aluminum reflector for spot light only
- Lens:4mm toughenedglass
- Body material: durable aircraft-grade aluminum
- Angle of light beam: 110″ (video light), 20″ (spot light)
- Surface treatment: premium type III hard-anodizing
- Color: Black
- Battery: 1 • 26650 Li- ion battery with BMS
- With battery over-discharging protection, polarity reversing protection
- Operation voltage: 4.5 V to 2.8 V
- Waterproof: 125 Meters underwater
- Dimensions: 145 mm (length) • 45 mm (dia. of light head) *30.5 mm (dia. of light body)
- Weight in air: approx. 193 g. (without battery); approx. 284 g. (with battery)
- underwater weight: approx. 148 g. (with battery)
Low Battery Warning:
The light flashes 3 times if the power capacity is less than 10%; it repeats
after 5 seconds, and then switches to lower brightness. The light switches off
automatically when the power capacity is lessthan5%to prevent over-discharging
battery.
Battery Installation:
- Holding the light with its tail pointing upward, unscrew the light tail.
- Remove used battery from battery compartment, if there is any; and put in fully charged battery per polaritysigns.
- Screw light tail down. Do not overtighten to break the 0-ring.
Battery Charging:
- Plug the charger in the power socket, the charger’s indicator light is green in the free-load status.
- Put the battery in the slot of the charger. The charger’s indicator light is red if the charging is in process, and it turns green after the charging is completed.
- After the battery is fully charged, unplug the charger, take the battery out, use or store it properly.
Modes Changing:
- When the light is off, twist the magnetic ring switch to the left to turn it on in White (video light) high brightness mode; then twist the ring switch to the right to OFF sign and back to the left with a one-second interval to change to White (video light) medium brightness mode.
- When the light is off, twist the magnetic ring switch to the right to turn it on in White (spot light) high brightness mode; then twist the ring switch to the left to OFF sign and back to the right with a one-second interval to change to White (spot light) edium brightness mode.
Caution:
- Please never attempt to repair or modify the light yourself.
- Please handle illuminants with care to avoid breakage. llluminants can break or splinter whenbangingagainstthe device.Splinters cancause eye and skininjuries.
- Please check the light regularly for sharp edges, scratches or damages to the surface or 0-ring, as this can cause the light to flood under pressure. PLEASE LUBRICATE AND REP LACE 0-RING TIMELY.
- Please rinse the product surface thoroughly alter each use, and allow sufficient time for it to dry both inside and outside before storage.
- Please remove the battery for transport or storage. Do not lay the battery in a fire or expose it to direct heat. Do not wet or hit the battery. Please charge it after each use, or once every three months, to avoid over-discharging.
- Please neverleavethe light unattended when it is on.
- Please keep the device out of the reach of children and pets.
- Please nevershinethe light to human orpet’seye.
Warranty Return Policy:
Please contact your local distributor or retailer for information on how to handle your warranty tems.
RIFF Sports e.K.
Bahrenfelder Chaussee 10
22761 Hamburg
office@riff-sports.com
www.riff-sports.com
References
Read User Manual Online (PDF format)
Loading......