MARKLIFE M1 Label Printer User Manual

MARKLIFE M1 Label Printer

Product Information

Specifications

• Bluetooth: Yes
• Compatibility: Android and iOS
• Label Size: The default size is 40mm * 12mm, but can be adjusted for other sizes
• FCC Warning: Yes

Product Usage Instructions

Bluetooth Connection
To pair the label printer with your mobile phone via Bluetooth, follow these steps:

1. Turn on the Bluetooth on your phone.
2. Open the marklife APP.
3. Click on “UNLINK” to search for the M1 Label Printer.
4. Note: If the label printer cannot pair with the Bluetooth of your mobile phone, make sure to turn on the phone Bluetooth and open the APP. Then click “UNLINK” to find the printer.

Install label stickers correctly
To install the label stickers correctly, follow these steps:

1. Make sure the stickers face out of the paper.

Create label – Operation method 1:
To create a label using the first operation method, follow these steps:

1. Click on “Scan” to scan the QR code on the label paper package to get the corresponding template.
2. Step: Homepage find Scan – Scan QR code on the paper package – Confirm.
3. Note: Only the original label paper has the QR code.

Create label – Operation method 2:
To create a label using the second operation method, follow these steps:

1. If the label machine is installed with a gap sticker of size 40mm * 12mm, select the gap label.
2. If you are using other sizes of stickers, please select the correct size.

FAQ (Frequently Asked Questions)

• Q: Why can’t I pair the Bluetooth of the label printer with my mobile phone?
  A: Make sure to turn on the Bluetooth on your phone and open the marklife APP. Then click “UNLINK” to find the printer.

• Q: Do Android users need to authorize address permission to connect to the printer?
  A: Yes, Android users need to authorize the address permission to search for Bluetooth devices and successfully connect to the printer. This is a requirement of the Android system, not an APP requirement.

First time using

Please open the paper compartment cover and put the paper on top of the printer. After closing the paper compartment cover, the paper will expose a short section of the printer, as shown in the figure:

Only one side of the printing paper can be printed. Please place the printing paper in the correct direction.

Product Introduction

Power indicator status

• Steady green light: power on/standby/charge completed
• Red light ON: charging/out of paper/overheating/opening the cover
• Red light flashing: low battery will cause weak handwriting please charge in time.

Please avoid direct contact with the print head to avoid damage, especially after printing, do not directly touch the print head immediately to prevent overheating.

App download and settings

Mobile Download
Search “Marklife” in the App Store

Settings

• After entering the app, click to search for bluetooth devices, and click to Connect Now.
• (Note: Please do not search and connect a Bluetooth printer in the Bluetooth settings of your mobile phone)

Bluetooth connection

The label printer can’t pair Bluetooth to the mobile phone

Note:

1. Turn on the phone’s Bluetooth;
2. Open the app and click “UNLINK” to find the printer.

• Android users need to authorize the address permission to search for Bluetooth devices and successfully connect to the printer.
• This is a requirement of the Android system, not an APP requirement.
• APP Connect Bluetooth Successfully

Install label stickers correctly

Install stickers – Stickers face out of the paper

Operation Methods

Create label – Operation method 1:

• Click”Scan” to scan the OR code on the label paper package to get the corresponding template.
• Step: Homepage find Scan-Scan QR code on paper package-Confirm

Only the original label paper has the QR code

Create label – Operation method 2:

1. The label machine is installed with a gap sticker—–40mm*12mm, select the gap label.
2. The default size is shown here: 40mm *12mm, if you use other sizes of stickers, please select the correct size.

Replacement of consumables

1. Opening the cover: in the direction of the arrow as shown, press the cover opening button to open the cover
2. Consumables: in the direction shown in the figure, put the heat-sensitive surface of the paper on the same side as the heat-sensitive head

Safety and precautions

1. There is a built-in lithium battery, please do not use it in an environment with temperatures higher than 40ºc; keep away from fire and other heat sources, and do not place it in the hot sun, such as closed car;
2. Children should be charged and used under the supervision of adults. After a full charge, please make sure to pull out the charging line in time to prevent overheating, short circuit or fire;
3. Do not put the product in fire or water to avoid battery short circuit or fire or bum;
4. The operating temperature range is 0 ºc: to 40ºc, please do not exceed the recommended temperature range.
5. There is a built-in lithium battery, please do not use it in an environment with temperatures higher than 40 °C; keep away from fire and other heat sources, and do not place it in the hot sun, such as a closed car;
6. Children should be charged and used under the supervision of adults. After a full charge, please make sure to pull out the charging line in time to prevent overheating, short circuits or fire;
7. Do not put the product in fire or water to avoid battery short circuit or fire or burn;
8. The operating temperature range is 0 °C to 40 °C, please do not exceed the recommended temperature range;
9. If you suspect that there is a problem with the battery, please contact the after-sales service centre for assistance.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note:
The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co- located or in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>