TELTONIKA TSW100 Industrial Unmanaged POE+ Switch User Guide

TELTONIKA TSW100 Industrial Unmanaged POE+ Switch

Product Information

The TSW100 is a PoE (Power over Ethernet) switch designed for powering end devices such as IP cameras via Ethernet. It has 5 Ethernet ports with PoE capabilities and a power socket for connecting a power supply. The switch has a maximum power consumption of 130 W and requires a power supply of the same wattage to function properly. The TSW100 is compliant with national and international laws and must be used in accordance with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.

Product Usage Instructions

1. Connect your main internet router/modem to TSW100 LAN port number 5.
2. Connect the end devices (such as IP cameras) that you want to power via Ethernet to TSW100 ports 1 to 4.
3. Connect a 4-pin power plug to the TSW100 to power up the switch.

Note that the TSW100 requires a power supply with a maximum wattage of 130 W, which must be ordered separately and is dependent  on the order code. Also, make sure to comply with any and all applicable national and international laws and special restrictions when using the TSW100 in prescribed applications and environments.

https://wiki.teltonika-networks.com/

FRONT VIEW

BACK VIEW

POWER SOCKET PINOUT

RJ45 LED MEANING

TECHNICAL INFORMATION

Technical specifications

Input voltage range*| 7 – 57 VDC
Max power consumption no PoE devices connected| <9 W
Max PoE power budget at PSE| 120 W
Max Ethernet cable length| 100 m
Bundled accessories specifications*****
Power adapter| Input: 1.8 A @100-240 VAC, Output: 50 VDC, 1.3 A, 4 pin plug

• PoE operates properly only when connected power supply outputs 44 V or higher voltage.
• Provided power supply only allows 60 W PoE power budget at PSE, to reach maximum 120 W at PSE >130 W power supply must be used
• Order code dependent.

HARDWARE INSTALLATION

1. Connect your main internet router/modem to TSW100 LAN port number 5.
2. Connect end devices (ex. IP camera) to TSW100 1 to 4 port, which you want to power via Ethernet.
3. Connect 4 pin power plug to TSW100 to power up switch.

SAFETY INFORMATION

TSW100 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.

Hereby, TELTONIKA NETWORKS declares that this TSW100 is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU and 2014/35/EU.

The full text of the EU declaration of conformity is available at the following Internet address: https://wiki.teltonika- networks.com/view/TSW100_CE

Instruction Manual: Connect the power adapter to turn on the device. More information on https://wiki.teltonika-networks.com/

This sign means that all used electronic and electric equipment should not be mixed with general household waste.
This sign means that product meets the requirements of the applicable EU directives.
www.teltonika-networks.com
2021 Teltonika Networks

References

• Teltonika Networks - LTE Routers, Gateways & Modems for IoT
• wiki.teltonika-networks.com
• wiki.teltonika-networks.com/
• wiki.teltonika-networks.com/view/TSW100_CE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>