TELTONIKA TSW210 Industrial PoE Ethernet Switch User Guide
- October 30, 2023
- teltonika
Table of Contents
Industrial PoE Ethernet Switch
TSW210
Quick Start Guide v1.0
TSW210 Industrial PoE Ethernet Switch
Wiki knowledge base
https://wiki.teltonika-networks.com/
FRONT VIEW BACK VIEW
POWER SOCKET PINOUT
RJ45 LED MEANING
TECHNICAL INFORMATION
| Technical specifications
---|---
Input voltage range| 7 – 57 VDC
Max Ethernet cable length| 100m
**Bundled accessories specifications***
No accessories
- Order code dependent.
HARDWARE INSTALLATION
- Connect your main internet router/modem to TSW210.
- Connect end devices to TSW210 1 to 8 port.
- Connect 2 pin power plug to TSW210 to power up switch.
SAFETY INFORMATION
TSW210 switch must be used in compliance with any and all applicable national
and international laws and with any special restrictions regulating the
utilization of the communication module in prescribed applications and
environments.
Hereby, TELTONIKA NETWORKS declares that this TSW210 is in compliance with the
essential requirements and other relevant provisions of Directive 2014/30/EU
and 2014/35/EU.
The full text of the EU declaration of conformity is available at the
following
Internet address: https://wiki.teltonika-networks.com/view/TSW210_CE
Connect the power adapter to turn on the device. More information on
https://wiki.teltonika-networks.com/
This sign means that all used electronic and electric equipment should not be
mixed with general household waste.
**** This sign means that product meets the requirements of the applicable EU
directives.
www.teltonika-networks.com
2022 Teltonika Networks
References
- Teltonika Networks - LTE Routers, Gateways & Modems for IoT
- wiki.teltonika-networks.com
- wiki.teltonika-networks.com/
- wiki.teltonika-networks.com/view/TSW210_CE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>