kogan KAVACRBL14W Smarter Home Point Laser Robot User Guide

Kogan KAVACRBL14W Smarter Home Point Laser Robot

Specification

• Product Name: Kogan SmarterHome Point Laser Robot Vacuum Cleaner and Mop
• Models: KAVACRBL14W & KAVACRBL14A
• Components: Vacuum Cleaner, Charging dock, Power adapter, 2-in-1 Dustbin/Water tank, Mopping module, Dust bin, Mop cloth, HEPA & sponge filter, Cleaning brush, L & R side brushes (x2), User guide

Product Usage Instructions

Installation

1. Connect the power adapter to the power input port on the underside of the charging dock.
2. Connect the power adapter to an electrical outlet. Wrap any excess cord around the cord management posts.
3. Place the charging docks against a wall on a flat surface and then turn the outlet on.
4. Attach the left and right side brushes (L, R) to the corresponding letter on the underside of the vacuum. There should be a clicking sound when each side brush is secured.
5. Place the vacuum on the charging contacts on the dock to charge.

Installation of 2-in-1 Dustbin/Water Tank

1. Attach the mop to the bottom of the mop module.
2. When using the mopping function, open the water plug and fill the dustbin/water tank with water. Replace the water plug securely. Do not add detergent to the dustbin/water tank.
3. Lift the handle, remove the dustbin from the water tank, fill it with water, and ensure the lid is fastened tightly.
4. Put the dustbin back into the water tank, lay the handle flat, and install the water tank.
5. Press and hold the button in the 2-in-1 dustbin/water tank and push it until you hear a click indicating it is securely in place.
6. Press and hold the 2 buttons in the middle of the mop module  and attach it to main unit. Push it in horizontally until you heara click indicating it is securely in place.

FAQ
Q: Can I add detergent to the dustbin/water tank?
A: No, do not add detergent to the dustbin/water tank. Only fill it with water for mopping function.

KOGAN SMARTERHOME POINT LASER ROBOT
VACUUM CLEANER AND MOP
KAVACRBL14W & KAVACRBL14A

SAFETY & WARNINGS

• Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference.
• The vacuum can be used adults and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction concerning use of the vacuum in a safe way and understand the hazards involved
• Do not allow children to use this appliance as a toy.
• Children must be supervised to ensure they do not play with the appliance.
• Keep children and pets away from the vacuum.
• This vacuum can only be used for indoor domestic floor cleaning. Do not use outdoors, on objects, or in commercial/industrial environments.
• Do not use the vacuum in the environments where it may fall (for example, on top of furniture or on balconies).
• The operating environment of this vacuum is between 0 40°C.
• Do not use this vacuum if there are liquids on the ground.
• Remove any cables or wires on the floor before cleaning to prevent them from being tangled or dragged by the vacuum.
• Remove any fragile articles or miscellaneous items that may block the path of the vacuum. Not removing these may lead their damage.
• Do not place anything (including children and pets) on the vacuum.
• When the vacuum is operating, keep hair, fingers and other parts of human body and pets away from the brushes.
• Do not use the vacuum to clean flammable items (for example, burning cigarette butts).
• Do not use the vacuum to clean long-haired carpets. Some darker carpets also might not be able to be cleaned normally.
• Do not use the appliance to vacuum hard or sharp objects (for example, glass, nails).
• Do not use the protective cover of the laser radar or bumper as a handle to carry the vacuum.
• Do not use the mopping function on carpet or on top of furniture.
• Ensure the power cord is unplugged before cleaning or maintaining the appliance.
• Ensure there is no water in the dustbin/water tank when charging the vacuum.
• Do not place objects (including children and pets) on a stationary or moving appliance.
• Please do not use the product to sweep burning objects (such as burning cigarette end)
• Before cleaning or performing maintenance ensure the power is off and the vacuum has been disconnected from power,
• Do not use this product in any way that deviates from the instructions provided in this User Guide.

Battery and Charging

• Do not use any third-party batteries, non-rechargeable batteries charging bases, or chargers.
• Do not disassemble, repair, or modify the battery or auto-empty dock by yourself.
• Do not place the auto-empty dock near heat sources (for example, heating radiators).
• Do not use a damp cloth or wet hands to wipe or clean the auto-empty dock.
• Dispose of used batteries properly and send them to professional recycling agencies.
• If the power cord is damaged or broken, cease use immediately and contact help.Kogan.com for support.
• When transporting the vacuum, ensure that the appliance is turned off and the original packaging box is used for packaging.
• If the machine is left unused long, it should be fully charged and then placed in a cool and dry place. Charge the vacuum at least every 3 months to avoid damaging batteries due to excessive discharge.
• The charging base is only suitable for charging the vacuum robot KAVACRBG80P supplied with the Li-ion cylindrical rechargeable battery CMICR18650F8M7-4S1P (Rating: 14.4V, 2600mAh, 36.0Wh). lt is not suitable to charge any other vacuums or batteries.
• Warning: Do not recharge non-rechargeable batteries.

Disposal Instructions

• The following instructions apply only when disposing of the vacuum, not for daily operation.
• The built-in battery of the main unit contains chemicals that can harm the environment.
• Before disposing of the product, ensure the battery is removed and handed to a licensed recycling organisation. Only remove the battery when it is fully discharged, and never allow it to come into contact with metal objects.

COMPONENTS

 OVERVIEW

Long press to start local cleaning
Power button| Press and hold the button for 3 seconds to power on/off
Short press to start Sweep/Pause
Long press for 15s for forced shutdown under normal circumstances
Indicator| Blue: Normal operation or charging
Red: Abnormal condition or low battery
Wi-Fi pairing mode| Press and hold Home and Power buttons simultaneously for 3 seconds

Charging Dock

 INSTALLATION

1. Connect the power adapter to the power input port on the underside of the charging dock.

2. Connect the power adapter to an electrical outlet. Wrap any excess cord around the cord management posts.

3. Place the charging docks against a wall on a flat surface and then turn the outlet on. Notes:

   • Ensure there is a 50cm clearance either side, and 150cm clearance in front of the dock. When installing, keep the power cord in the air; if it is close to the ground, it may be dragged by the vacuum, causing the charging dock to lose power.
   • The power indicator will stay on when connected to power.

4. Attach the left and right side brushes (L, R) to the corresponding letter on the underside of the vacuum. There should be a clicking sound when each side brush is secured.

5. Place the vacuum on the charging contacts on the dock to charge.
   Notes:

   • If the product cannot turn on due to low power, place the vacuum on the charging dock. The product will automatically power on once the battery level reaches 20% or more.
   • Ensure the front of the vacuum is aligned with the charging dock, so the charging contacts on the product connect with the charging pins. The distance between the front of the vacuum and the dock should be approximately 02 cm, as shown in the image.

Install 2-in-1 Dustbin/Water tank

1. Attach the mop to the bottom of the mop module.

2. When using the mopping function, open the water plug and fill the dustbin/water tank with water. Replace the water plug securely. Do not add detergent to the dustbin/water tank. Lift the handle, remove the dustbin from the water tank, fill it with water, and ensure the lid is fastened tightly.
   Note
   It is recommended to remove the dustbin before adding water to avoid water entering the dust box.

3. Put the dustbin back into the water tank, lay the handle flat, and install the water tank.

4. Press and hold the button in the 2-in-1 dustin/water tank and push it until you hear a click indicating it is securely in place.

5. Press and hold the 2 buttons in the middle of the mop module and attach it to main unit. Push it in horizontally until you hear a click indicating it is securely in place.

Note
The mopping function of the equipment only has the effect of wiping, which is helpful for deep cleaning, but cannot effectively remove stubborn stains and cannot completely replace manual labour

Removing the 2-in-1 Dustbin/Water Tank

1. After the cleaning, press and hold the 2 buttons in the middle of the moping module. Slide the moping module backward and remove it, then take out the mop cloth. (Do not move or flip the main unit while it is in operation.)
2. After removing the moping module, press and hold the button in the middle of the water tank and pull it out horizontally from the rear of the main unit. Empty the remaining water from the water tank and remove any debris from the dustbin. (Do not move or flip the unit during operation.)

Tips for use

1. Do not use the water tank when no one is home.
2. For safety, be sure to remove the water tank when charging or not in use.
3. Do not use the mopping function on carpeted areas. You can prevent the device from entering the carpet by setting a forbidden area.
4. To obtain a better mopping effect, it is recommended to install the mopping module after cleaning it 3 times before first use.
5. If you need to add water or clean the mop cloth during operation, pause in place first, follow the above steps and then resume cleaning.

BEFORE FIRST USE

Checks to the area

• Ensure there are no loose wires or cables scattered on the ground. This is to prevent the vacuum becoming entangled or dragged along.
• Ensure all fragile items, those easy to topple, dangerous items, and valuables are removed. This is to prevent items being damaged and to avoid personal injuries.
• Do not use the vacuum to clean liquids.
• To reduce the likelihood of accidental damage, it is recommened to block off steps or steep drop-offs.

CONNECT TO SMARTERHOME APP

Install App
Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).

To register

1. If you already have a SmarterHome account, select ‘Log In’. To register a new account, select ‘Sign Up’.
2. The system will automatically recognise your country. If needed, you can manually select your country from the drop-down box. Enter your email address and tap ‘Get Verification Code’ to continue.
3. A 6-digit code will be sent to the submitted email address. Enter this code before the one-minute timer expires
4. Continue to the next pade and comolete vour SmarterHome profile

Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (both buttons are slowly flashing purple). If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing and holding the home and power buttons simultaneously for 3 seconds voice prompt ‘WIFI resetting’ is heard and the Wi-Fi indicator begins flashing Blue. Add device through network

1. Once registered, tap “Add Device” on the app’s home page, or the “+” in the upper right corner, to add a new device through the network.

2. Select the product type from the list of options in the app (Cleaning Appliances > Vacuum cleaners).

3. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.
   Notes
   The device and the app have to use the same Wi-Fi network.
   The device is only compatible with 2.4Ghz networks.

4. Adjust your connection method by tapping on the mode type in the top-right corner of the screen. Select AP Mode for the set-up type.

5. Ensure that the device is in pairing mode, with the power and home buttons are slowly flashing Blue, select Confirm indicator is slowly blink and tap Next.

6. Follow the in-app prompts to continue AP Mode connection, which will pair your -Fi hotspot to ensure a connection. This may be —
   Note
   If the Wi-Fi hotspot does not appear on your phone in the list of available networks, your device may not be set in AP Pairing Mode correctly. Try repeating the steps outlined above to ensure your device is ready for connection. mobile phone to the device’s Wi named “SL KoganSmart”, “Smartlife XXXX”, or another similar name.

7. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete.

8. After successfully being added, you will have the option to rename the device and assign it to a location. It will now be listed on the app’s home page. Tap the device listing to enter its control page.

Note
Once connected, you can select Create Scene from the “+” in the upper right corner (or from the Scene tab) to group connected SmarterHome™ products and automate their functions.

GOOGLE HOME CONTROL

Note: You will need to have set up a Google Home account prior to linking your Kogan SmarterHome™ device Adding “SmarterHome” to the Google Home app

1. From the home page of the Google Home app, select the “+” icon (top left corner, see arrow in the below screenshot) to access the ‘Add and manage’ page.
2. Select ‘Set up device’, then select the ‘Works with Google’ option.
3. Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service
4. From here, you will be prompted to sign into your Smarter Home™ account using either your email or mobile phone number, depending on which method you used to register your account.
5. Select “Kogan SmarterHome™” from the app options.
6. Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices.
7. Once connected, the app will display any compatible devices linked to your SmarterHome™ account. From here you can assign them to rooms and set up any routines. Tap on any of the devices to view a list of available commands.

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>