eLinkSmart F3BC Smart Cabinet Lock User Manual
- September 21, 2024
- eLinkSmart
Table of Contents
eLinkSmart F3BC Smart Cabinet Lock
Reminder : Please read the user manual carefully before using the lock, and keep it for future reference.
Technical Specification
Item | Specification |
---|---|
Model | F3BC |
Unlocking Methods | App, RFID, NFC |
App Name | eSmartlock |
App Connection Method | BT |
BT Connection Distance | 33ft (10M) |
Number of Accounts | 1 Admin Account & 500+ Sub-Accounts |
Number of RFID Cards | 100 (Max) |
RFID Frequency | 13.56MHz |
Power Supply Mode | 2 x AA Batteries |
Dynamic Current | 100mA(Max) |
Static Current | 25uA |
Working Temperature | 14°F-113°F |
Product Details
- A. 2 xAA Batteries (Not Included )
- B. Reset Button
- C. Battery Indicator
- D. Status Indicator
Buzzer & LED Indicator
Buzzer | Description |
---|---|
1 Time | Card Unlock Successful |
3 Times | Card Unlock Failed |
5 Times | Low Battery Reminder |
LED Indicator | Description |
--- | --- |
Blue Light Slowly Flash | Waiting for BT Connection |
Blue Light Always on | BT Connection Successful |
Green Light Flash 5 Times | Restore to Factory |
Setting
Green Light on| Unlock Successfully
Red Light on| Card Recognition Error
Light off| Standby/ Unlocked
Package Included
NO. Content
- A 1 x Lock Body
- B 1 x Buckle
- C 2 x Lock Body Double-Sided Tapes
- D 2 x Buckle Double-Sided Tapes
- E 1 x Double Doors Accessory
- F 2 x RFID Cards
- G 4 x Lock Body Screws
- H 2 x Buckle Screws
- I 2 x Accessory Screws
Installation Instructions
Step 0. Install Batteries and Setup
- Install 2 AA Batteries (Not Included)
- Setup the Lock
NOTE : Before installing the lock, please set it up (Refer [6. Setup Guides]) to avoid accidentally locking it that not being able to unlock.
Step 1. Install the Lock Body[A]
- Confirm the position of the Lock Body.
- Fix the Lock Body with Lock Body DoubleSided Tapes[C] or screws[G]
Steo 2. Install the Buckle[B]
- Confirm the position of the latch through measurement.
- Fix the Buckle with Buckle Double-Sided Tapes[D] or screws[H]
Reminder : Can simultaneously use double sided tape and screws to install to increase stability.
Setup Guides
Download and Install App
Download and install the [eSmartLock] App from App Store (iOS) / Google Play
(Android), or scan the QR code
Register and Login
Connect to the Lock via BT
NOTE : The Lock is connected to App via BT, so please ensure BT
permission is allowed to the App.
App Unlock
Click the “Unlock” icon to unlock
Register a RFID Card / NFC
- Card Management
- Click [+] button in the upper right corner
- Enter the Card name and click [Add to]
- Place the RFID Card/Phone NFC next to the Lock
- Then you can use the registered RFID Card / NFC to unlock
Delete a RFID Card / NFC
- Card Management.
- Click the RFID Card / NFC you want to delete.
- Click BIN button in the upper right corner.
- Click [Confirm]
Volume Setting
- More features
- Click [Sound] to adjust the volume
- Mute, Low, Medium, High
Passage Mode
- More features
- Click the Button next to [Normally Open Mode]
- Click again to turn off [Passage Mode], that is [Auto Lock Mode]
Restore Factory Default Settings
- More features
- Click [Unbind smart lock] at the bottom
- Click [Confirm]
Battery Indicator
- ****: 75-100%
- ***: 50-75%
- ** : 25-50%
-
- : 0-25%
Low Battery Reminder
When the battery level is lower than 25%, the lock will beep continuously 5
times to remind you to replace new batteries.
Keep Unlocked in Low Battery
When the batteries become too low to operate, the lock will unlock
automatically and keep unlocked before replacing new batteries.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Welcome to contact us if you have any queries.
E-Mail : esmartlock@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>