eLinkSmart YL-F3BC-V1.1 Hidden Smart Cabinet Lock User Manual
- May 15, 2024
- eLinkSmart
Table of Contents
**eLinkSmart YL-F3BC-V1.1 Hidden Smart Cabinet Lock User Manual
**
Reminder : Please read the user manual carefully before using the lock, and keep it for future reference.
Technical Specification
item | Specification |
---|---|
Model | F3BC |
Unlocking Methods | App. RFID, NFC |
App Name | eSmart Lock |
App Connection Method | BT |
BT Connection Distance | 331t (10M) |
Number of Accounts | Admin Account & |
500+ Sub-Accounts
Number of RFID Cards| 100 (Max)
RFID Frequency| 13.56MHz
Power Supply Mode| 2 x AA Batteries
Dynamic Current| 100mA (Max)
Static Current| 25uA
Working Temperature| 14°F-113°F
Product Details
A. 2 x AA Batteries (Not Included)
B. Reset Button
C. Battery Indicator
D. Status Indicator
Buzzer & LED Indicator
Buzzer | Description |
---|---|
1 Time | Card Unlock Successful |
3 Times | Card Unlock Failed |
5 Times | Low Battery Reminder |
LED Indicator | Description |
--- | --- |
Blue Light Slowly lash | Waiting for BTConnection |
Blue Light Always on | BT Connection Successful |
Green Light Flash 5Times | Restore to Factory Setting |
Green Light on | Unlock Successful |
Red Light on | Card Recognition Error |
Light off | Standby / Unlocked |
Package Included
NO. Content
A : 1 x Lock Body
B 1 x Buckle
C 2 x Lock Body Double-Sided Tapes
D 2 x Buckle Double- Sided Tapes
E 1 x Double Doors Accessory
F 2 x RFID Cards
G 4 x Lock Body Screws
H 2 x Buckle Screws 2
x Accessory Screws
Installation Instructions
Step 0. Install Batteries and Setup
- Install 2 AA Batteries (Not Included)
- Setup the Lock
NOTE: Before installing the lock, please set it up (Refer [6. Setup
Guides]) to avoid accidentally locking it that not being able to unlock.
Step 1. Install the Lock Body[A]
-
Confirm the position of the Lock Body
-
Fix the Lock Body with Lock Body Double Sided Tapes[C] or screws[G]
Step 2. Install the Buckle [B]
- Confirm the position of the latch through measurement
- Fix the Buckle with Buckle Double-Sided Tapes[D] or screws [H]
Reminder: Can simultaneously use double sided tape and screws to install
to increase stability.
Setup Guides
-
Download and Install App
-
Download and install the [eSmartLock] App from App Store (i0S) / Google Play (Android), or scan the QR code
-
Register and Login
-
Connect to the Lock via BT
NOTE: The Lock is connected to App via BT, so please ensure BT permission is allowed to the App.
-
App Unlock
-
Click the “Unlock” icon to unlock
-
Register a RFID Card / NFC
-
Card Management
-
Click [+] button in the upper right corner
-
Enter the Card name and click [Add to]
-
Place the RFID Card/Phone NFC next to the Lock
-
Then you can use the registered RFID Card /NFC to unlock
-
Delete a RFID Card / NFC
-
Card Management
-
Click the RFID Card / NFC you want to delete
-
Click [ ] button in the upper right corner
-
Click [Confirm]
-
Volume Setting
-
More features
-
Click [Sound] to adjust the volume
-
Mute, Low, Medium, High
-
Passage Mode
-
More features
-
Click the Button next to [Normally Open Mode]
-
Click again to turn off [Passage Mode], that is [Auto Lock Mode]
-
Restore Factory Default Settings
-
More features
-
Click [Unbind smart lock] at the bottom
-
Click [Confirm]
Other Functions
-
Battery Indicator
** : 100%
*** : 50-75%
* : 25-50%
:** 0-25% -
Low Battery Reminder
-
When the battery level is lower than 25%, the lock will beep continuously 5 times to remind you to replace new batteries.
-
Keep Unlocked in Low Battery
-
When the batteries become too low to operate, the lock will unlock automatically and keep unlocked before replacing new batteries.
Welcome to contact us if you have any queries.
E-Mail: esmartlock@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>