eLinkSmart 1560011775 Smart Padlock User Manual
- May 15, 2024
- eLinkSmart
Table of Contents
eLinkSmart 1560011775 Smart Padlock
User’s Manual
NOTE:
MUST DOWNLOAD APP FIRST Before using this lock for the first time, please log
in to the App “eSmart Lock” to register the account and bind it, and then
register fingerprints through the App. If you register fingerprints before
binding the lock to the APP, the APP cannot be used.
To restore App function, it needs to clear the fingerprint restore the factory mode, and re-bind.
Product Features
- Charge by USB cable. Please fully charge the lock for the first time.
- The smart lock can be unlocked by any fingerprint in factory mode.
- Support APP ‘eSmartLock’ & fingerprint unlock.
- Support 1 admin account & 500+ sub-accounts.
- Support 100 fingerprints.
- If you click ‘unbind smart lock’, the lock will be restored to factory mode, and delete all settings.
- Fully charging time is 120 minutes. Standby time 2 years.
Indicator Light
Indicator Light | Description |
---|---|
Red light flashes fast | Low power |
Blue light flashes slowly | Waiting for BT connection |
Blue light keeps on | BT connected successfully |
Green light flashes fast | Restored to factory setting |
Green light on | Unlock successfully |
Red light on | Failed to verify fingerprint |
Light off | Standby I Unlocking |
Power indicator (Applicable to some models, not universal)
Capacity Light | Description |
---|---|
4pcs Light ON | 100% Battery |
3pcs Light ON | 75% Battery |
2pcs Light ON | 50% Battery |
1pcs Light ON | 25% Battery |
No Light ON | No Battery |
App & Smart Lock Configuration
-
App Installation
Search “eSmartLock” From Google Play (Android)/App Store (iOS) and install it to a smartphone -
Register
Log in Log in eSmartLock by registered account. (Fig. 1-2)
-
App Permission Settings
- It’s connected via BT, so the BT of the smartphone should be turned on (Fig. 3)
- In order to use BT properly it needs to obtain location permission for an Android phone
-
Add Smart Lock
- When to add a smart lock to the App. It should keep the smart lock in working status. Touch the fingerprint/touch sensor of the smart lock and blue light flashes
- When the blue light starts to flash, click “+” in the upper right corner of the APP and enter “Add device”, the scanned smart lock will be displayed in the list. Click the smart lock to be added in the list, to complete the device addition. (Fig. 4 – 6)
-
Connect Smart Lock
- When to connect the smart lock to the App. It should keep the smart lock in working status. Touch the touch sensor of the smart lock and blue light flashes
- BT connection: When the blue light is flashing, click “Connect” on the main interface of the APP. After the connection is successful, the blue light stays on. Please note that the smart lock will go to sleep mode and BT is disconnected automatically when there is no operation for 1 minute.
-
Authorization management
-
You can add sub-accounts through “Account Sharing” or “Scan QR Code to Share”. Scan account is that other accounts scan to add smart lock by connecting to BT, and be added to the unauthorized list automatically. (Fig. 7)
Authorize the unlocking period of the sub-account/scan account (Fig. 8) . Click the time to set the schedule (Fig. 9). -
Delete the authorized user, click the “X” to the right to delete the user.
-
-
Unlock Method
- APP connect with smart lock: Please read the “E. Connect smart lock” instruction.
- Unlock by Admin account: Click the “Unlock” button to unlock the smart lock directly (Fig. 10).
- Unlock by authorized account: Click “Unlock” in the permission period (Fig. 11). If it is not within the unlocking period, you need to request the administrator account to authorize the time to unlock (Fig. 12).
- Unlock by fingerprint: Press the fingerprint sensor by the registered fingerprint. ( Please read “I. Fingerprint Management” instruction.)
-
Unlock Record
- APP connect with smart lock: Please read the “E. Connect smart lock” instruction
- Check unlock record: Click “BT unlock record” to check the record of the user, unlock time, unlock method, etc. (Fig. 13) Click “Fingerprint unlock Record”. It can check the record of the unlock user (Fig. 14)
Fingerprint Management
-
A. Factory mode: Use any fingerprints to unlock the lock, and the blue indicator light on.
Register fingerprints:- APP connects with the lock. Please read ‘E. Connect smart lock’ instruction.
- Please wake up the lock. Then go to ‘User Management’ to add fingerprints.
- Click the “+” icon in the upper right corner of the interface (Fig. 15) to enter the add fingerprint interface (Fig. 16-17).
- Please follow the voice prompt to input your fingerprints. Successfully add your fingerprints(Fig. 18).
Only use the fingerprint to unlock
Note: In this case, the Bluetooth APP function cannot be used. If you
need to restore the Bluetooth APP function, please delete the administrator’s
fingerprint. For specific methods, please refer to ‘ Resetting. 2’.
-
Only want to use fingerprint to unlock. Please follow the next steps to register your fingerprints. The 1st and 2nd fingerprints are administrators. The 3rd to 100th is general user fingerprints.
-
Before APP setting, using your fingerprint to press and hold on the fingerprint sensor for 8 seconds until the blue light is on. Then use the same fingerprint to press 5 times, and the green indicator light will flash each time.
Then register the administrator fingerprint successfully. -
lf register the 3rd to 100th fingerprints, need the administrator’s fingerprint to press for 8 seconds until the blue light is always on, and then press the fingerprint for 5 times to register. The green light flashing indicates successfully registered.
Modify fingerprint:
Enter to modify the fingerprint name (Fig. 19), after inputting the
fingerprint name, click “Modify”, the modification is successful.
Delete fingerprint:
The icon in the upper right corner deletes the fingerprint.
Resetting
- Reset the lock Please click ‘Unbind smart lock’ from the admin account(Fig.10). All settings will be deleted. Restore factory settings.
- Reset the fingerprint setting by deleting the administrator’s fingerprint Use the administrator’s fingerprint to long-press the fingerprint sensor until the blue light appears and turns to red. Lift the fingerprint and press it again. The green light appears. All fingerprints are successfully deleted and factory settings are restored. Then you can set the lock through the APP.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>