Setup/Operate Instruction

Setup/Operate Instructions

1. The first first 3 fingerprint users and the 3 passcode users registered after the machine is initialized are the administrators.
2. When the fingerprint is not entered, any fingerprint or the initial passcode “123456” can be unlocked. After registering the fingerprint or passcode, the unregistered fingerprints and passcodes will not be able to unlock.
3. The fingerprint lock can enter up to 50 fingerprints and 100 unlock passcodes.
4. After the fingerprint lock is restored to the factory setting, all registered fingerprints and passcodes will be deleted.

Register a Fingerprint

1. Touching the numeric keypad to wake up the code area.
2. Press the “1” + “#” key, the green light on and the voice prompts “Please verify the administrator”.
3. Authenticate using admin fingerprint or passcode. If no fingerprint or passcode has been registered, use any fingerprint or the initial passcode “123456” to verify.
4. After successful verification, the voice prompts “Please start entry”. Place your same finger 5 times at the fingerprint reader at different angles.
5. The green light will be on and the voice prompts “Entry is successful” if the Fingerprint is registered successfully.

Setup a Passcode

1. Touching the numeric keypad to wake up the code area.
2. Press the “1” + “#” key, the green light on and the voice prompts “Please verify the administrator”.
3. Authenticate using admin fingerprint or passcode. If no fingerprint or passcode has been registered, use any fingerprint or the initial passcode “123456” to verify.
4. After successful verification, the voice prompts “Please start entry”. Enter the passcode you want to set (support 6 to 12 digits password length) and press the “#” key to end. The passcode entry needs to be entered twice.
5. The voice prompts “Passcode set successfully”, and a Passcode is successfully set up.

Restore Factory Default Settings

1. Touching the numeric keypad to wake up the code area.
2. Press the “888” + “#” key, the red light will be on and the voice prompts “Please verify administrator”.
3. Place admin fingerprint or enter admin passcode to verify.
4. The green light will be on and the voice prompt “Restore Factory Default Settings Successful”.

Forced Factory Reset

1. Press and hold the reset button on the rear handle (the small hole next to the button) for 8 seconds, the light flashes in red, release it, the light turns green, and the voice prompts “Factory settings restored successfully”, Press and hold the reset button on the rear handle (the small hole next to the button) for 8 seconds, the light flashes in red, release it, the light turns green, and the voice prompts “Factory settings restored successfully”, all registered fingerprints and passcodes will be deleted.

Free Passage and Auto Lock Mode Switch

• Turn On the Free Passage Mode Press the Free Passage Mode button on the Rear Handle.
• Turn On the Auto Lock Mode Press the Free Passage Mode button on the Rear Handle again.

Low Battery Reminder

When the battery level is lower than 20%, the red light will flash quickly to remind you.

Anti-peep Passcode Unlocking

Enter random digits before or after your real passcode to confuse prying eyes. The total length of the entered passcode cannot be greater than 12 digits.

Accessibility

Long press the “#” key for 3 seconds to exit the menu and enter the off-screen sleep state.

Color Indicator Lights

administrator verification.
2.Flashing, fingerprint registration status.
Setup a Passcode| Failure| Successful|
Restore Factory
Default Settings| Failure| Successful|
Fingerprint Unlock| Failure| Successful|
Passcode Unlock| Failure| Successful|
Low Battery Reminder| 5 Consecutive
Flashes| |

Tuya Smart APP Instructions

Download and Connect to APP

1. Download and install the [Tuya Smart] APP from APP Store (iOS) / Google Play (Android).
2. Open the APP and follow the prompts to register and log in.
3. Touching the numeric keypad to wake up the Lock and Connect to APP.

APP Unlock

Obtain Dynamic Passcode

Member Management

Adding or Removing someone’s fingerprint or passcode.

Unlocking Records

Viewing all real-time unlock records.

Smart Linkage

1. Family members go home reminding.
2. Fingerprint and Passcode input error warning.

Settings

1. Fingerprint Management, add or delete a fingerprint.
2. Password Management, add or delete a password۔
3. Temporary Password, setting [One-Time Password] and [Periodic Password].
4. Lock navigation volume, adjust the lock navigation volume to mute, low, normal, and high.

Restore Factory Default Settings

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>