kogan KAMCTGASSSA 60CM Gas Cooktop User Guide

kogan KAMCTGASSSA 60CM Gas Cooktop

Product Information

Specifications

• Product: Gas Cooktop
• Size: 60cm
• Models: KAMCTGASSSA & KAMCTGASBLA

Product Usage Instructions

Safety & Warnings
Before using the gas cooktop, make sure to read and understand all safety instructions provided in the manual. Here are some key safety points:

• Danger: Ensure the power cord is in perfect condition before installation.
• Child and People Safety: Always supervise individuals with limited capabilities when using the appliance.
• Cleaning and Maintenance: Wait for the cooktop to cool completely before cleaning.

Installation

WARNING: This cooktop must be installed by a licensed trade professional.

Space Requirements: Ensure the space dimensions meet the requirements specified for your model.

1. Remove pan supports, burner lid, and flame spreader from the appliance.
2. Place the appliance upside down on a cushioned mat, taking care not to damage ignition devices.
3. Apply the sealing strip around the edge of the appliance without gaps or overlaps.
4. Attach brackets to the cooktop, then lower it into the aperture hole.
5. Adjust and secure the cooktop into position using screws.

Gas Connection

Gas Connection: Follow these steps to connect the gas:

1. Adjust the direction of the elbow as required and tighten it securely.
2. Check for good condition and test air tightness after installation.

Required Tools

• Screwdriver: Use for assembly and disassembly of screws.
• Tubing Wrench: Use for assembly and disassembly of tubing to the burner cup.
• 7mm Injector Nozzle Tool: Use for assembly and disassembly of injector nozzles.

FAQ

• Q: Can I install the gas cooktop myself?
  A: It is recommended to have a licensed trade professional install the cooktop to ensure proper setup and safety compliance.

• Q: How often should I clean the gas cooktop?
  A: Clean the cooktop regularly, ensuring it has cooled down completely before maintenance to avoid burns or damage.

SAFETY & WARNINGS

• Read this user guide carefully before installing or using this appliance.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children must not play with the appliance.
• Cleaning and user maintenance must not be done by children without supervision.
• If the power cord is damaged, cease use immediately and contact help.Kogan.com for support. Do not attempt to repair or replace the power cord yourself.
• This user guide must be kept with the appliance for future reference. If the appliance is sold or transferred to another person, ensure the user guide is passed on to the new user.
• The power cord of this product comes with a plug. No additional wiring is required.
• All operations relating to installation, regulation, and conversion to other gas types must be carried out by an authorized installation engineer, respecting all applicable regulations, standards, and specifications of the local gas and electricity providers.
• This appliance is designed for household use only, not for commercial or professional use.
• Before installing, check that local distribution conditions (gas type and pressure) and the appliance’s adjustment are compatible. The appliance’s adjustment conditions are written on the label or the specifications plate.
• This appliance must only be installed in a well-ventilated place according to existing regulations and ventilation specifications.
• The appliance must not be connected to a combustion product removal device.
• The power cord must be attached to the unit to prevent it from touching hot parts of the cooktop. Appliances with electrical power supply must be earthed. Do not tamper with the appliance’s interior.
• The units next to the appliance must be made of non-flammable materials. The laminated covering and glue must be heat-resistant.
• This appliance cannot be installed above fridges, washing machines, dishwashers, or similar. An oven must have forced ventilation to install a cooktop above it. Check the dimensions of the oven.
• This appliance must be installed by the regulations in force and only used in a well-ventilated space. Read the instructions before installing or using this appliance.

Danger:
If there is a suspected gas leak:

1. Follow the immediate safety steps:
   • Do not turn on any lights.
   • Do not switch any electrical appliances on or off and do not touch any electrical outlets.
   • Do not use a telephone inside the house.
   • Stop using the product and close the main gas valve.
   • Open windows to ventilate the area.
2. Contact the appropriate authorities:
   • Call the National Gas Emergency Service on 1800 GAS LEAK (1800 427 532).
   • If you cannot reach the National Gas Emergency Service, call your local gas supplier or emergency services (000) for immediate assistance.
   • Make the call from a phone outside the house to avoid any potential ignition of the gas.

Installation

Warning:

• This appliance must be installed by regulations in force and only used in a well-ventilated space.
• Before installation, ensure that the gas and electrical supply complies with the type stated on the rating plate.
• This appliance cannot be installed on yachts or in caravans. Do not use this appliance as a space heater.
• The gas pipe and power cord must be installed in such a way that they do not touch any parts of the appliance.

Caution:

• This appliance should be installed by a qualified technician.
• The adjustment conditions for this appliance are stated on the label or data plate.
• Remove all packaging before using the appliance.
• After unpacking the appliance, make sure the product is not damaged and that the power cord is in perfect condition. Otherwise, contact help.Kogan.com before installing the appliance.
• The adjacent furniture and all materials used in the installation must be able to withstand a minimum temperature of 85°C above the ambient temperature of the room it is in, whilst in use.
• In the event of burner flames being accidentally extinguished, turn off the burner and do not attempt to re-ignite the burner for at least one minute.
• Caution: The use of a gas cooking appliance results in the production of heat, moisture, and combustion products in the room in which it is installed. Ensure that the kitchen is well ventilated especially when the appliance is in use.
• Prolonged intensive use of the appliance may require additional ventilation, for example, the increasing of mechanical ventilation where present, additional ventilation to safely remove the combustion products to outside (external) air whilst also providing room air changes with additional ventilation. Consult a professional before installation of the additional ventilation.
• Caution: This appliance is for cooking purposes only. It must not be used for other purposes, for example, room heating.
• Caution: Young children must be kept away.
• Caution: If the glass surface breaks:
  • Immediately turn off all burners and any electrical heating elements and isolate the appliance from the power supply.
  • Do not touch the appliance surface.
  • Do not use the appliance.
• Do not use a stove guard. The use of inappropriate stove guards can cause accidents.

Child and People Safety

Warning:

• Do not allow children to play near or with the appliance.
• The appliance gets hot when it is in use. Children should be kept away until it has cooled.

Caution:

• This appliance is designed to be operated by adults.
• Children can injure themselves by pulling pans or pots off the appliance.
• This appliance is not intended for use by children or other persons whose physical, sensory, or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.

During Use

• Do not use or store flammable materials in the storage drawer near this appliance.
• Perishable food, plastic items, and aerosols may be affected by heat and should not be stored above or below the appliance.
• Do not spray aerosols in the vicinity of this appliance while it is in operation.
• Ensure the control knobs are in the ‘Off’ position when not in use.

Warning:

• Only use the appliance for preparing food.
• Do not modify this appliance. This appliance is not designed to operate from an external timer or separate remote control system.
• The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed. Ensure that the kitchen is well-ventilated: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood).
• Do not use this appliance if it comes in contact with water. Do not operate this appliance with wet hands.
• The heating and cooking surfaces of the appliance become hot when they are in use.
• Do not use large cloths, tea towels, or similar as the ends could touch the flames and catch fire.
• Never leave the appliance unattended when cooking.
• Unstable or misshapen pans should not be used on the appliance as they can cause an accident by tipping or spillage.
• Do not modify this appliance.
• This appliance must be installed by an authorized technician or installer.
• Before installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible.
• The adjustment conditions for this appliance are stated on the label (or data plate).
• This appliance is not connected to a combustion products evacuation device. It must be installed and connected by current installation regulations. Particular attention must be given to the relevant requirements regarding ventilation.
• Before installing, turn off the gas and electricity supply to the appliance.
• All appliances containing any electrical components must be grounded.
• Ensure that the gas pipe and power cord are installed in such a way that they do not touch any parts of the appliance that may become hot.
• A gas pipe or connector shouldn’t be bent or blocked by any other appliances.
• Check the dimensions of the appliance as well as the dimensions of the gap to be cut in the kitchen unit.
• The panels located above the work surface and directly next to the appliance must be made of non-flammable material. Both the stratified surfacing and the glue used to secure it should be heat resistant, to prevent deterioration.
• Turn on the appliance tap and light each burner. Check for a clear blue flame without yellow tipping.
• If the burners show any abnormalities check the following:
  • The burner lid on correctly
  • The flame spreader is positioned correctly.
  • Burner vertically aligned with injector nipple.
• A full operational test and a test for possible leakages must be carried out by the fitter after installation.
• The flexible hose shall be fitted in such a way that it cannot come into contact with a moveable part of the housing unit and does not pass through any space susceptible of becoming congested.
• Grease cranes produced at the factory to meet the requirements of all life cooktops.

Caution:

• This appliance is intended for domestic cooking only. It is not designed for commercial or industrial purposes.
• Prolonged intensive use of the appliance may call for additional ventilation, for example, opening of a window or increasing the level of mechanical ventilation where present.
• Use heat-resistant potholders or gloves when handling hot pots and pans.
• Do not let potholders come near open flames when lifting cookware.
• Take care not to let potholders or gloves get damp, as this causes heat to transfer through the material quicker with the risk of burning yourself.
• Only ever use the burners after placing pots and pans on them. Do not heat up any empty pots or pans.
• Never use plastic or aluminum foil dishes on the appliance.
• When using other electrical appliances, ensure the cord does not come into contact with the appliance surfaces.
• If you have any mechanical parts in your body, e.g. a pacemaker, consult a doctor before using the appliance.
• Do not use a tea towel or similar materials in place of a potholder. Such clothes can catch fire on a hot burner.
• When using glass cookware, make sure it is designed for top-plate cooking. If the surface is made of glass and cracks, switch off the appliance to avoid electrocution.
• To minimize the possibility of burns, ignition of flammable materials, and spillage, turn cookware handles toward the side or center of the top plate without extending over adjacent burners.
• Always turn burner controls off before removing cookware.
• Carefully watch foods being fried at a high flame setting.
• Always heat fat slowly and watch as it heats.
• Frying foods should be as dry as possible. Frozen foods, or frost or moisture on fresh foods, can cause hot fat to bubble up and over the sides of the pan.
• Never try to move a pan of hot fat, especially a deep-fat fryer. Wait until the fat is completely cool.

Cleaning and Maintenance

Warning:

• Never use abrasive or caustic cleaning agents.
• This appliance should only be repaired or serviced by Kogan.com. If the appliance is damaged, cease use and contact help.Kogan.com for support.

Caution:

• Before attempting to clean the appliance, disconnect the power plug and allow the appliance to cool.
• Do not use high-pressure cleaning equipment to clean the appliance.

Environmental Information

• After installation, dispose of the packaging with due regard to safety and the environment.
• When disposing of an old appliance, make it unusable by cutting off the power cord.
• Follow all local laws and regulations for environmentally safe recycling.

COMPONENTS

INSTALLATION

WARNING: This cooktop must be installed by a licensed trade professional.

Space Requirements

• The edges of the cooktop must be a minimum distance of 60mm from a side or rear wall.
• There must be 650mm between the highest point of the cooktop surface (including the burners) and the underside of any horizontal surface directly above it.
• There must be 400mm between the cooktop surfaces, providing that the underside of the horizontal surface is in line with the outer edge of the cooktop. If the underside of the horizontal surface is lower than 400mm, then it must be at least 50mm away from the outer edges of the cooktop.
• Maintain 50mm clearance around the appliance and between the cooktop surface and any combustible materials.

• There must be a gap of at least 25mm and at most 74mm between the underneath of the appliance and any surface that is below it.
• An oven must have forced ventilation to install a cooktop above it.
• Check the dimensions of the oven in its user guide.
• The cutout size must obey the indication.

Installing the Appliance

1. Remove the pan supports, the burner lid, and the flame spreader carefully turn the appliance upside down and place it on a cushioned mat.

2. Take care that the ignition devices and flame supervision devices are not damaged in this operation.

3. Apply the sealing strip provided around the edge of the appliance. Do not leave a gap in the sealing strip or overlap the thickness.
   Note:
   Do not use a silicon sealant to seal the appliance against the aperture. This will make it difficult to remove the appliance from the aperture in the future, i.e. if it needs to be serviced.

4. Place the bracket (A) over the holes that match the size of the screws. There is one set of screw holes in each corner of the cooktop. Slightly tighten a screw (B) through the bracket (A) so that the corner bracket is attached to the cooktop, but so that you can still adjust the position.

5. Carefully turn the cooktop back over and then gently lower it into the aperture hole that you have cut out.

6. On the underside of the cooktop, adjust the brackets into a position that is suitable for your worktop. Then fully tighten the screws (B) to secure the cooktop into position.

Gas Connection

• This appliance must be installed and connected per installation regulations in force in the country in which the appliance is to be used.
• This appliance is supplied to run on LPG and natural gas. Conversion for use on LPG and natural gases must only be undertaken by a qualified person.
• Note: Wear protective gloves to fit the cooktop.
• Caution: If adjustment or installation of the elbow is required, only use a torque wrench with a setting of 9±1N.m. Apply the torque to the black nut on the manifold, not to the elbow itself.

Adjusting the Direction of the Elbow

1. After loosening the elbow, adjust the elbow interface to the required direction as required and keep the hexagonal head of the elbow motionless with a wrench.
2. Use a 9±1N.m torque wrench to tighten the black bolt of the gas inlet pipe assembly. Ensure that the torque of the wrench is within the required range to prevent elbow breakage or damage caused by excessive force.
3. After the installation is tightened, check whether the parts are in good condition and test the air tightness to ensure the tightness of the installation.

Warning:

• Danger of leaks. Check the seal if any connection is handled.
• Turn off power for safety and to protect the appliance. Close the middle valve to prevent gas leakage.
• Keep flammable materials away from the appliance. Wear gloves before starting work.
• Allow the appliance to cool down after use to prevent burns from high temperatures.

Required Tools

Replacement of Gas-type Fitting

1. Disassemble the gas-type fittings from the main gas tube using a spanner. When disassembling or assembling the gas connection, use two spanners: one to secure the gas connection elbow and the other to tighten the gas hose.
2. Tightly lock a replaceable gas-type fitting onto the main gas tube.

WARNING:
Do not use another elbow, it may lead to a gas leak. Do not use seal tape which is not intended for gas use. It is recommended to use AS4623-certified Teflon tape.

Statutory Requirements
This installation must conform to the following:

• Local Gas Fitting Regulations.
• Municipal Building Codes.
• Refer to AS/NZS 5601.1 for Gas Installations.
• S.A.A. Wiring Code.
• Local Electrical Regulations.
• Any other statutory regulations.

Preparing to Install

• Refer to AS/NZS 5601.1 for piping size details. This built-in cooktop is intended to be inserted into a benchtop cutout.
• Only an officially authorized technician should connect the appliance.
• Before you begin, turn off the gas and electricity supply.

Caution

• A full operational test and a test for possible leakages must be carried out by the fitter after installation.
• Access to the entire length of the connection hose must be possible, and the gas hose must be replaced before the end of its service life (as indicated on the hose).
• Before leaving, check all connections for gas leaks using soap and water.
• Do not use a naked flame to detect leaks. Ignite all burners both individually and concurrently to ensure the correct operation of gas valves, burners, and ignition. Turn the gas taps to the low flame position and observe the stability of the flame for each burner individually and all together. Adhere the duplicate data plate to an accessible location near the hotplate. When satisfied with the hotplate, instruct the user on the correct method of operation. If the appliance fails to operate correctly after all checks have been carried out, cease use and contact help.Kogan.com for support.
• Flexible Hose: If installed with a hose assembly, it must comply with AS/NZS 1869, 10mm ID, class B or D, no more than 1.2m long, and be installed by AS/NZS 5601.1.
• Ensure that the hose does not contact the hot surfaces of the hotplate, oven, dishwasher, or any other appliance that may be installed underneath or next to the hotplate. The hose should not be subjected to abrasion, kinking, or permanent deformation and should be able to be inspected along its entire length with the cooktop in the installed position. Unions compatible with the hose fittings must be used, and all connections tested for gas leaks. The electrical outlet must be accessible with the appliance installed.
• Warning: Ensure that the hose assembly is restrained from accidental contact with the flue outlet of an under-bench oven.

Gas Connection

• Install by relevant gas standards and/or codes. Connect the elbow fitting to the appliance gas manifold connection and check that the seals between the elbow and manifold connection are in place and in good condition.
• For Natural Gas:
  • Connect the natural gas appliance regulator (pictured below) with an integral test point using approved gas thread tape or compound to the elbow fitting.
  • Ensure the supply connection point, test point and natural gas regulator adjustment screw are accessible for testing and/or adjustment with the hotplate in the installed position.
• For Universal LPG: Connect the brass test point adaptor (pictured below) using approved gas thread tape or compound to the elbow fitting.
• Where a flexible hose assembly is used, ensure it is approved to AS/NZS 1869, Class B. The hose assembly must be restrained from accidental contact with the flue outlet of an under-bench oven. It must be suitable for connection to a fixed consumer piping outlet located as follows: for hotplates, at a point 800mm to 850mm above the floor and within a region extending 250mm beyond the width of the appliance.
• After connecting to the gas, check for leaks using the soapy solution, never a naked flame.

Electrical Connection

• This appliance must be grounded.
• This appliance is designed to be connected to a 220-240V, 50Hz-60Hz AC electrical outlet.
• The wires in the power cord are colored in accordance with the following code:
  • Green/Yellow = Earth
  • Blue = Neutral
  • Brown = Live
• The wire which is colored green and yellow must be connected to the terminal which is marked with the letter ‘E’ or by the grounding symbol.
• If the power cord is damaged, cease use immediately and contact help.Kogan.com for support.

Wiring diagram:

Gas Adjustment

Caution:

• Take precautions on the operations and adjustments to be carried out when converting from one gas to another.
• All work must be carried out by a qualified technician.
• Before you begin, turn off the gas and electricity supply to the appliance.

Change the Injector of the Burners:

1. Remove the pan support, burner lid, and flame spreader.
2. Unscrew the injector using a 7mm box spanner and replace it with the stipulated injector for a new gas supply.
3. Carefully reassemble all components.
4. After injectors are replaced, it is advisable to strongly tighten the injector in place.

Adjusting the Minimum Level of the Flame:

1. Turn the taps down to the minimum.
2. Remove the control knob from the tap and place a small, bladed screwdriver in the center of the adjustment screw.
3. The correct adjustment is obtained when the flame has a length of about 3-4 mm. For butane/ propane gas, the adjusting screw must be tightly screwed in.
4. Refit the control knob. Make sure that the flame does not go out by quickly turning from maximum flow to minimum flow. If it does, then remove the control knob and make further adjustments to the gas flow, testing it again once the adjustment has been made.
5. Repeat this process for each of the taps.

Caution:

• Do not dismantle the tap safe. In the event of a malfunction, change the whole tap.
• Before replacing the burners, ensure the injector is not blocked.
• A full operational test and a test for possible leakages must be carried out after gas conversion, (such as with soapy water or a gas detector).
• After completing conversion, a qualified technician must mark ‘V’ on the right gas category to match with the setting on the rating plate. Remove the previous setting ‘V’ mark.

OPERATION

Warning

• Fats and oil, when heated, can release flammable vapors. Keep flames or heated objects away from fats and oils when you cook with them.
• Very hot oil vapors can cause spontaneous combustion, monitor your food closely during cooking.

Caution

• Do not use cast iron pans, clay or earthenware pots, grill pans, grills, or toaster plates, as the resulting heat build-up may damage the appliance.
• Do not touch the top plate and trivet whilst in use and until cooled.
• As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid simmering.

Using the Appliance
The following symbols will appear on the control panel, next to each control knob.

• The minimum setting is at the end of the anti-clockwise rotation of the control knob.
• All operation positions must be selected between the maximum and minimum positions.
• The symbol on the control panel next to the control knob will indicate which burner it operates.

Flame Failure Safety Device
The appliance is fitted with a flame failure safety device on each burner, which is designed to stop the flow of gas to the burner head in the event of the flame going out.

Igniting a Burner

• Press and hold the control knob of the burner you wish to light and turn it anti-clockwise to the maximum position.
• Keep the control knob held down for 15 seconds after the burner ignites. If the burner does not ignite after 15 seconds, stop operating the device, open the compartment door, and wait at least 1 minute before attempting to ignite the burner again.
• After the 15-second interval, to regulate the flame, continue turning the control knob anti-clockwise until the flame reaches the desired level. The operating position should be between the maximum and minimum settings.
• To switch the burner off, turn the control knob fully clockwise to the ‘gas off’ position.
• In case of a power failure, the burners can be lit carefully using a match.

Safety and Energy Saving Advice

Caution: Do not use the cookware that overlaps the edge of the burner.

CLEANING & CARE

Caution

• Cleaning must only be performed when the appliance is completely cool.
• The appliance should be disconnected from the electrical outlet before commencing cleaning.
• Clean the appliance regularly, preferably after each use.
• Abrasive cleaners or sharp objects will damage the appliance’s surface. It is recommended to use water and mild detergent to clean the appliance.

Pan Support and Control Knobs

• Remove the pan support.
• Clean the pan support and the control handles with a damp cloth, mild detergent, and warm water. For stubborn soiling, soak beforehand.
• Dry everything with a clean, soft cloth.

Top Plate

• Regularly wipe the top plate using a soft cloth well wrung out in warm water with a small amount of mild detergent.
• Dry the top plate thoroughly after cleaning.
• Remove salty foods or liquids from the cooktop as soon as possible to avoid the risk of corrosion.
• Stainless steel parts of the appliance may become discolored over time due to high temperatures. Clean these parts with a product suitable for stainless steel each time the appliance is used.

Burners

• Remove the burner lids and flame spreaders by pulling them upwards and away from the top plate. Soak them in hot water with a little detergent or washing-up liquid.
• After cleaning, wipe and dry them carefully, ensuring that the flame holes are clean and completely dry.
• Wipe the fixed parts of the burner cup with a damp cloth and dry afterward.
• Gently wipe the ignition device and flame supervision device with a well-wrung-out cloth and then dry with a clean cloth.
• Before placing the burners back on the top plate, make sure the injector is not blocked.

Reassemble the Auxiliary, Semi-rapid, Rapid, and Triple-Crown Burners

Caution:

• Replace parts in the correct order after cleaning.
• Do not mix up the top and bottom.
• The locating pins must fit exactly into the notches.

Reassembly:

1. Place the flame spreader (4) onto the burner cup (5) so that the ignition device and the flame supervision device extend through their respective holes in the flame spreader. The flame spreader must click into place correctly.
2. Position the burner lid (1, 2, 3) onto the flame spreader (4) so that the retaining pins fit into their respective recesses.

SPECIFICATIONS

Gas Specifications

Gas type & pressure| Heat input and orifice size marked (mm)|
---|---|---
Wok burner| Rapid burner| Semi-rapid| Auxiliary
 | 13.5MJ/h| 10.8MJ/h| 6.3MJ/h| 4.3MJ/h
Universal LP Gas 2.75kPa| 1.00| /| 0.68| 0.58
Natural Gas 1.0kPa| 1.72| /| 1.15| 0.93

TROUBLESHOOTING

• Repairs should be performed by a licensed technician only. Improper repair may result in considerable danger.
• If the power cord is damaged, cease use immediately and contact help.Kogan.com for support.
• However, some minor problems can be resolved as follows. If these solutions are unsuccessful, contact help.Kogan.com for support.

Problem

| Possible Cause|

Solution

---|---|---
Not ignited.| No spark.| Check the electricity supply.
The burner lid is assembled incorrectly.| Assemble the lid correctly.
The gas supply is closed.| Open the gas supply completely.
Poorly ignited.| The gas supply is not completely open.| Open the gas supply completely
The burner lid is assembled incorrectly.| Assemble the lid correctly.
The ignition plug is contaminated with a foreign substance.| Wipe the foreign substance with a dry cloth.
The burners are wet.| Carefully dry the burner lids.
The holes in the flame spreader are blocked.| Clean the flame spreader.
Noise is made when combusted and ignited.| The burner lid is assembled incorrectly.| Assemble the burner lid correctly.
The flame goes out when in use.| The flame supervision device is blocked by a foreign substance.| Clean the flame supervision device.
---|---|---
The food being cooked has boiled over and extinguished the flame.| Turn off the control knob. Wait one minute and reignite.
A strong draught may have blown the flame out| Turn off the control knob and check the cooking area for a draught such as open windows. Wait one minute and reignite.
Yellow flame.| The holes in the flame spreader are clogged.| Clean the flame spreader.
Different gas is used.| Check the gas used.
Unstable flame.| The burner lid is assembled incorrectly.| Assemble the burner lid correctly.
Gas smell.| Gas leakage.| Stop using the product and close the middle valve. Open the window to ventilate.

Contact your local authorities by using a phone outside.

Disposal
This marking indicates that this appliance should not be disposed of with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Need more information?

• We hope that this user guide has given you the assistance needed for a simple set-up.
• For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>