JONATHAN Y JYL1116 26 Inch Light Wide LED Vanity Light Instruction Manual

JYL1116 26 Inch Light Wide LED Vanity Light

“`html

Product Specifications:

• Model: JYL1116
• Product Dimensions: 25.5”L x 9”W x
  10.75”H

Product Usage Instructions:

Preparation:

Before beginning assembly of the product, ensure all parts are
present. Compare parts with the package contents list and hardware
contents list. Do not attempt to assemble the product if any part
is missing or damaged. Estimated Assembly Time: 20 minutes.

Installation Steps:

1. Fix the mounting plate (A) to the outlet box with mounting
   screw (B).

2. Make wire connections using wire connectors (D) according to
   the reference chart listed in the manual.

3. Grounding Instructions:

   • For installation in the United States: Wrap the ground wire
     from the outlet box around the green ground screw (C) on the
     mounting plate.

   • For installation in Canada: If the fixture is supplied with a
     ground wire, wrap it around the green grounding screw on the
     mounting bracket.

4. Place the body (F) over the mounting plate (A) and secure it
   with retaining screw (E).

5. Put the shade (G) on the socket and fasten it with socket ring
   (H).

6. Install bulbs (I). Use light bulbs with wattage no greater than
   specified on this fixture.

Note: Always ensure that the electrical current
is turned off before changing bulbs. Use only ON/OFF type A bulbs
with a maximum of 40 watts or LED bulbs of 9 watts. The box
includes 3 pieces of 9-watt LED bulbs.

Frequently Asked Questions:

Can this lighting fixture be installed by a

non-professional?

No, we recommend installation by a licensed electrician for
safety reasons.

What should I do if there are missing or damaged parts?

If any part is missing or damaged, do not attempt to assemble
the product. Contact customer support for assistance.

Can the external flexible cable or cord be replaced if

damaged?

No, if the cord is damaged, the lamp should be destroyed as per
safety guidelines.

“`

WARNING WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING ** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture. To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slighly damperned clean clorth (use clean water, never a solvent) to wipe the interior surface of the fixture. Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS Please make sure that you have all parts indicated before you begin assembly of this item This item should be assembled on a soft surface to prevent scratching the finish during assembly To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this lamp cannot be replaced If the cord is damaged, the lamp shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

A mounting plate

1X

F

body

1X

B

mounting screw

2X

G

shade

3X

C ground screw

1X

H

socket ring

3X

D wire connector

3X

I

bulb

3X

E

screw

2X

1/2

Model#: JYL1116 Product Dimensions: 25.5”Lx9″Wx 10.75″H

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes.
If there are any questions relating to defects, missing parts, assembly issues, replacements, or device conne ctivity issues, please send a detailed email to cs@jonathany.com 1.Fix the mounting plate(A) to the outlet box with mounting screw(B).
2. Make wire connections, with wire connectors(D), following the reference chart listed below.

Connect, Hot, Black or Red Outlet Supply Wire to: Black

• Parallel Cord (round & smooth)

Connect, Neutral, White Outlet Supply Wire to: White

• Parallel Cord (square & ridged)

Clear, Brown, Gold or Black without Tracer (colored stripes)

Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor

Insulated Wire (not green) with Silver metal conductor.

*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )

Grounding Instructions: a) For installation in the United States: Wrap ground wire from outlet box around green ground screw(C) on mounting plate, no less than 2″ from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector. b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding screw on mounting bracket. Tighten ground screw.
3. Place the body (F) over mounting plate (A) and secure with retaining screw (E)
4. Put the shade(G) on socket,then fasten it by socket ring(H)
5. Install bulbs(I). Be sure to use light bulb(s) with wattage no greater than specified on this fixture. Always make sure that electrical current is turned off before changing bulbs.

PLEASE USE ON/OFF TYPE”A” BULB MAX 40-WATT OR LED BULB 9-WATT THERE ARE 3PCS 9-WATT LED BULB IN THE BOX
ENJOY YOUR LAMP

2/2

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>