Panasonic ER-CSF1 Shaver Head Hair Clippers and Trimmers Instruction Manual

: June 3, 2024
: Panasonic

Table of Contents

Safety precautions
Important information
Parts identification (Fig. 1)
How to use
Maintenance
Troubleshooting
IN USA CONTACT:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Panasonic ER-CSF1 Shaver Head Hair Clippers and Trimmers Instruction Manual

Safety precautions

Follow these instructions

To prevent accidents, injuries or damage to property, please follow the instructions below.

The following chart indicates the degree of damage caused by improper operation.

WARNING

Indicates potential hazard that could result in serious injury or death.

CAUTION

Indicates potential hazard that could result in minor injury or property damage.

WARNING

Preventing accidents

Do not place within reach of children or infants. Do not let them use it.
- Putting parts or accessories in the mouth may cause an accident or injury

CAUTION

Protecting the skin

Do not use excessive pressure to apply the system outer foil to your lip or other part of your face.
Do not apply the system outer foil directly to blemishes or injured skin.
Do not touch the blade section (metallic section) of the inner blade.
- Doing so may cause injury to skin or hand.
Do not use this appliance for hair on head or any other part of the body.
- Doing so may damage the foil causing injury to skin or reduce the life of the system outer foil.
Check the system outer foil for cracks or deformations before use.
- Failure to do so may cause injury to the skin.
Do not forcefully press the system outer foil. Also, do not touch the system outer foil with fingers or nails when in use.
- Doing so may damage the foil causing injury to skin or reduce the life of the system outer foil.

Note the following precautions

Do not share with your family or other people.
- Doing so may result in infection or inflammation.

Important information

Apply the lubrication oil after each cleaning for it will keep the movement of the blade smooth and maintain a comfortable shave.
Note the following precautions to avoid malfunction or deformation.
- Do not bring the system outer foil into contact with hard objects.
- Do not drop or hit against other objects.
- Store the appliance in a place with low humidity after use.
- Be sure to place the protective cap on the head when carrying around or storing

Parts identification (Fig. 1)

Safety precautions

Head

Protective cap
System outer foil
Foil frame
System outer foil release buttons
Outer foil section
Inner blades
Foil frame release button

How to use

Clean the appliance after use.

Mount the head to the main body until it clicks.
Turn on the power.

Note

The use time after a full charge is as follows.

ER-CBL1: 50 minutes
ER-CBN1: 40 minutes (Based on dry using at 20 °C – 30 °C) The operating time may differ depending on the frequency of use and the operating method.

Quick charge (ER‑CBL1 only)

Even though the battery runs out, you can use for 5 minutes after 3-minute charge. (This will differ depending on usage.)

Removing and mounting the head (Fig. 2)

Safety precautions

Make sure that the main body is turned off. Remove the head while pushing the head release button (a).
Stand the head when it is removed. Mount the head to the main body until it clicks.

Shaving (Fig. 3)

Safety precautions

Apply the whole system outer foil perpendicularly against the skin and shave by slowly gliding the appliance over the face against the grain of the beard

The beard under the chin and around the throat can be shaved better by stretching the skin to raise the beard.
To prevent damaging the system outer foil, do not shave with only a part of the system outer foil.

Maintenance

Make sure that the main body is turned off.
Lubricate after cleaning and store the head with the protective cap attached

How to clean

Safety precautions

With water

Apply some hand soap and some water to the system outer foil. (Fig. 4‑1)
Turn on the power and turn off the power after 20 seconds.
Remove the head and the outer foil section.
Rinse them with running water. (Fig. 4‑2)
Shake up and down several times to remove the water.
- Be careful not to hit the appliance on the sink or any other object while draining the water.
Wipe off the water with a dry cloth and dry it well.
- Allow the head to dry in the shade, avoid direct sunlight.
- Do not dry the appliance with a dryer or a fan heater.

Notes

Do not wipe with thinner, benzine, alcohol etc. Doing so may cause malfunction, cracking or discoloring of the parts.

With the cleaning brush

Remove the outer foil section and the inner blades.
Brush off any hair trimmings from the head and the outer foil section. (Fig. 5)
- Clean the inner blades using the brush by moving it in direction as illustrated.
- Do not move the brush perpendicularly against the blades as it will damage the inner blades and affect their sharpness.

Removing and mounting the outer foil and the inner blades

Safety precautions

Outer foil section (Fig. 6‑1)

Remove the frame by pushing the frame release button ( b).

Align as illustrated, securely attach the outer foil section to the head until it clicks.

System outer foil (Fig. 6‑ 2 )

Do not throw away the foil frame. Press the system outer foil release buttons ( c) and pull down the system outer foil.
Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame.

Align as illustrated, securely attach the system outer foil to the foil frame until it clicks.

Inner blades (Fig. 6‑ 3 )

Remove the inner blades one at a time.
Insert the inner blades one at a time.

Replacement parts

System outer foil: once every year
Inner blades: once every two years

Replacement part is available at your dealer or Service Center.

System outer foil and inner blades: WES9013
System outer foil: WES9087
Inner blades: WES9068
Lubrication oil: WES003P

Lubrication

Safety precautions

Apply one drop of lubrication oil to each of the system outer foils. (Fig. 7)
Turn on the power and allow to run it for approximately 5 seconds.
Turn off the power and wipe off any excess lubrication oil from the system outer foil with a soft cloth.

Troubleshooting

Problem	Action

The appliance has become blunt.
Operating time is short.
Appliance stopped functioning.| Until problems are solved, please follow each procedure as follows;

Charge the appliance.
Clean the blade and apply lubrication oil.
Replace the blade.

Makes a loud sound.| Clean the blade and apply lubrication oil.
The odor is getting stronger.| Confirm that the blade

is properly attached.

Shavings fly out in all directions.| This can be improved by cleaning every time after shaving.
System outer foil gets hot.| This can be improved by cleaning every time after shaving.

Clean the inner blades with the brush when shavings are adhering to the inner blades.

Apply lubrication oil.

Replace the system outer foil if it is damaged or deformed.

If the problems still cannot be resolved,

contact your dealer or a service center authorized by Panasonic for repair.

Personal Care & Beauty Care Products

FOR USA ONLY

30 -Day Quality

Satisfaction Guarantee

If you are dissatisfied with any Panasonic Personal Care & Beauty Care Products for any reason, simply return it to the place of purchase with a dated proof of purchase, in the original packaging, with all accessories, parts and instructions, within 30 days of the date of purchase, for a full refund, or call Panasonic at 1-800-338-0552. Abuse or misapplication of this product voids the guarantee

PRODUCT REGISTRATION

(U.S. customers only)

Go to www.panasonic.com/register and register your product now to receive these benefits:

Safety Notification

We contact our customers in case of recall

Owner Verification

Proof of purchase in case of product theft or loss

Efficient Warranty Service

In case there is a problem with your product

Special Offers and Promotions from Panasonic

FOR YOUR CONVENIENCE, WE HAVE ESTABLISHED A TOLL‑FREE (IN USA ONLY) NATIONAL ACCESSORY PURCHASE HOTLINE AT 1 -800 -332 -5368.