ET2 E30668 Serpentine Linear LED Pendant User Guide
- September 17, 2024
- ET2
Table of Contents
E30668 Serpentine Linear LED Pendant
“`html
Specifications:
- Item/Model Number: E30668 Serpentine Linear LED Pendant
- 1 x LED 78W (Included)
- Size: 3.54Lx1.88Wx1.08H
Product Usage Instructions:
Components:
Before starting, ensure the package contains the following
components:
- G x3
- A x1
- H x2
- B x1
- J x2
- C x2
- D x2
- E x1
- F x1
Installation Steps:
-
Identify and lay out all components.
-
Follow the wiring diagram for proper connections.
-
Mount the pendant according to the installation
instructions. -
Connect the ground wire (green wire) to the appropriate
terminal.
Operation:
After installation, switch on the power supply to activate the
LED pendant.
FAQ:
Q: How do I adjust the brightness of the LED pendant?
A: The brightness of the LED pendant cannot be adjusted as it
comes with a fixed wattage of 78W.
Q: What is the recommended mounting height for the
pendant?
A: The recommended mounting height for optimal illumination is
typically around 30 inches above the surface below the pendant.
“`
Item/Model Number: E30668 Serpentine Linear LED Pendant
1 x LED 78W (Included)
1 of (7)
reach children.
2 of (7)
Before getting,started,ensure the package Antes de comenzar, asegurese de que el paquete Avant de commencer, assurez-vous qu le
contains the following components:
contenga los siguientes componentes:
paquet contient les composants suivants:
G
x3
A
x1 H
x2
G5/32″*10
I
x1
5/32*6
NE046277100-2GH
B
x1 J
x2
Size: 3.54″Lx1.88″Wx1.08″H
C
x2
M5*35
D
x2
8-32″*25
E
x1
F
x1
STR06206BK-HF 6″ STEMS x1 STR06212BK-HF 12″ STEMS x3
3 of (7)
This fixture is equipped with an LED driver, please refer to Wiring Diagram Ce luminaire est équipé d’un pilote a LED,veuillez vous référer au Schéma De Câblage Este accesorio está equipado con un controlador LED, por favor consult el Diagrama De Cableado para obtener más detalles.
B H
Red Black
E
F
F
F
F A
I
Brown Blue
4 of (7)
This fixture is equipped with an LED driver, please refer to Wiring Diagram Ce
luminaire est équipé d’un pilote a LED,veuillez vous référer au Schéma De
Câblage Este accesorio está equipado con un controlador LED, por favor consult
el Diagrama De Cableado para obtener más detalles.
E
F F F F
B
C
D
5 of (7)
This fixture is equipped with an LED driver, please refer to Wiring Diagram Ce luminaire est équipé d’un pilote a LED,veuillez vous référer au Schéma De Câblage Este accesorio está equipado con un controlador LED, por favor consult el Diagrama De Cableado para obtener más detalles.
Positive (L)
G
Neutral (N)
B
OUTLOOK BOX
Ground Wire
(Green Wire)
E
E
4.
H J
6 of (7)
C 2024 ET2 CONTEMPORARY LIGHTING
7 of (7)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>