ET2 MA05876PC 70 LED Linear Pendant Installation Guide
- September 17, 2024
- ET2
Table of Contents
ET2 MA05876PC 70 LED Linear Pendant
English Before Getting
- Started Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of children.
- Choose a clean, level, spacious assembly area.
- Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to install it.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Risk of suffocation! Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the product.
- Caution there is risk of shock! Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Check the product cord to be sure is free torn or frayed.
- WARNING : Wires must to be connected to low voltage driver and should not be connected directly to live wire or a short may occur.
Cleaning & Maintenance
- On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
- Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
PARTS
Before getting,started,ensure the package contains the following components:
Installation
IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS.
VERIFIED LIST OF TESTED DRIVERS
- Lutron Diva DVCL-153P
- Lutron Diva SCL-300P
- LEVITON 6672-L
- Lutron Skylark CTCL-153P
- DEAKO Smart Dimmer
- DEAKO Single Dimmer
- LEVITON 6674
- LEVITON DSL06
IMPORTANT
If the control is not paired properly to LED fixtures, irreparable damage
may occur.
If the dimmer you are using is not listed here, consult a lighting
professional or view ourDimming Compatibility Chart online: www.et2online.com
/led-dimmer
Read User Manual Online (PDF format)
Loading......