ET2 E30162 Modular 1 Light LED Outdoor Installation Guide

September 17, 2024
ET2

ET2 E30162 Modular 1 Light LED Outdoor

Product Specifications

  • Item/Model Number: E30162 Modular 1-Light LED Outdoor
  • 1 x LED 8W (Included)

Product Usage Instructions

Installation

  1. For outdoor use, caulk around the fixture with silicone sealant to prevent water intrusion.
  2. Leave a gap at the bottom to allow moisture to escape.

Wiring Instructions
Make sure to follow the wiring diagram provided with the product.

The wiring should be done as follows:

  • Connect the ground wire (Green Wire) to the designated terminal.
  • Connect the Neutral (N) and Positive (L) wires to their respective terminals as indicated in the wiring diagram.

FAQ

  1. Q: Can this product be used indoors?
    A: No, this product is specifically designed for outdoor use.

  2. Q: Is a dimmer switch compatible with this product?
    A: Yes, a dimmer switch can be used, but it must be compatible with electronic lighting systems. It is recommended to consult with an experienced professional for installation.

Lamping | Ampoule: 1 x LED 8W (Included)
Please consult a qualified electrician prior to install
Made in China

Before Getting Started

Read the instructions carefully prior to assembling the product. When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
Carefully remove all packaging materials and retain for future use. Keep all hardware parts and packaging out of reach of children. Choose a clean, level, spacious assembly area. Avoid
hard surfaces that may damage the product. Ensure that you have all required contents for complete assembly. Take care when lifting. Assemble the product in close proximity to where you intend to install it. Do not over tighten the screws and bolts as this may damage the threads. Do not let children play with this product.

Risk of suffocation!
Keep packaging materials away from children.

Lamp Care Instructions

Carefully read through the instruction sheet before assembly and using the product.
Caution there is a risk of shock! Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning. Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire. Check the product cord to be sure is free torn or frayed.

WET LOCATION: For outdoor use, caulk around EXTERIOR fixture with silicone sealant to prevent water A L’EXTÉRIEUR intrusion. Leave a gap at the bottom to allow moisture to escape.

Cleaning & Maintenance
On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges. For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish. Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners. Periodically (every 90-180 days) make sure that the screws are fully tightened. Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

PARTS

Before getting,started, ensure the package contains the following components:

For outdoor use, caulk around fixture with silicone sealant to prevent water intrusion. Leave a gap at the bottom to allow moisture to escape.
IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS.

AC:120-277V~50/60HZ

LED DRIVER DIAGRAM

SCHEMATIC FOR GENERAL REFERENCE ONLY

VERIFIED LIST OF TESTED DIMMERS

  • Lutron Diva DVCL-153P
  • Lutron Diva DVELV-300P
  • Lutron Diva Caseta PD-6WCL
  • Lutron Maestro MACL-153M
  • DEAKO-Smart Dimmer
  • DEAKO-Single Dimmer
  • LEVITON 6672-L
  • LEVITON DSL06

GENERAL COMPATIBILITY
TRIAC / FORWARD PHASE
ELV / REVERSE PHASE
ONLY at 120VAC
Due to inrush current, wattage should not exceed 150W on a 600W dimmer

IMPORTANT! If the control is not paired properly to LED fixtures, irreparable damage may occur. If the dimmer you are using is not listed here, consult a lighting professional or view our Dimming Compatibility Chart online: https://www.maximlighting.com/led-dimmer
MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic lighting systems required
© 2024 MAXIN LIGHTING

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ET2 User Manuals

Related Manuals