ET2 E24189-05BK Planetary 1 Light LED Pendant Installation Guide
- September 17, 2024
- ET2
Table of Contents
Item/Model Number: E24189-05BK
Planetary 1-Light LED Pendant
E24189-05BK Planetary 1 Light LED Pendant
Lamping | Ampoule: LED Integrated 11W
Please consult a qualified electrician prior to install
Made in China
LED LOW-VOLTAGE INSTRUCTIONS
Before Getting Started
‘Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a box knife, be careful not
to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting, Assemble the product in close proximity to where you
intend to install it. Do not over tighten the screws and bolts as this may
damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock!
Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Check the product cord to be sure is free torn or frayed.
WARNING: Wires must to be connected to low voltage driver and should not
be connected directly to live wire or a short may occur.
Cleaning & Maintenance
On polished finishes, often using talc powder can reduce the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
deaner, stone polish, & wood polish.
Clean with soft cloth and a mild detergent. Do not use abrasive or harsh
cleaners.
Periodically (every 90-180 days) make sure that the screws are fully
tightened.
Prolonged exposureto heat sourcesmay cause glazing, melting and scorching, or
even cause color to fade.
PARTS
Before getting,started,ensure the package contains the following components: This fixture is equipped with an LED driver, please refer to the Wiring Diagram for more details
WIRING DIAGRAM
DIMMER COMPATIBILITY
MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lighting systems required
IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS. VERIFIED LIST OF TESTED DIMMERS
Lutron Diva DVCL-153P
Lutron Diva DVELV-300P
Lutron Diva Caseta PD-6WCL
Lutron Maestro MACL-153M
DEAKO-Smart Dimmer
DEAKO-Single Dimmer
LEVITON 6672-L
LEVITON DSLO6
GENERAL COMPATIBILITY
TRIAC / FORWARD PHASE
ELV / REVERSE PHASE
Only at 120VAC
Due to inrush current, wattage should not exceeed 150W on a 600W dimmer
IMPORTANT!
If the control is not paired properly to LED fixtures, irreparable damage may
occur.
If the dimmer you are using is not listed here, consult a lighting
professional or view our Dimming Compatibility Chart online:
www.etZonline.com/led-dimmer
MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lighting systems required
© 2024 ET2 CONTEMPORARY LIGHTING
Documents / Resources
| ET2
E24189-05BK Planetary 1 Light LED
Pendant
[pdf] Installation Guide
E24189-05BK Planetary 1 Light LED Pendant, E24189-05BK, Planetary 1 Light LED
Pendant, Light LED Pendant, LED Pendant, Pendant
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>