ET2 E24182-148 Planetary 2 Light LED Sconce Instruction Manual
- September 17, 2024
- ET2
Table of Contents
Item/Model Number: E24182
Planetary 2-Light LED Sconce
E24182-148 Planetary 2 Light LED Sconce
Lamping | Ampoule: 2xG9 3W (Included)
Please consult a qualified electrician prior to install
Made in China
GENERAL 120V INSTRUCTIONS
Before Getting Started
‘Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a box knife, be careful not
to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting, Assemble the product in close proximity to where you
intend to install it.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock!
Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Check the product cord to be sure is free torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder can reduce the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
deaner, stone polish, & wood polish.
Clean with soft cloth and a mild detergent. Do not use abrasive or harsh
cleaners.
Periodically (every 90-180 days) make sure that the screws are fully
tightened.
Prolonged exposureto heat sourcesmay cause glazing, melting and scorching, or
even cause color to fade.
PARTS
Before getting,started,ensure the package contains the following components: