ET2 E21182 Highball 14 LED Table Lamp User Guide
- September 16, 2024
- ET2
Table of Contents
ET2 E21182 Highball 14 LED Table Lamp
Before Getting Started
- Please consult a qualified electrician prior to install
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting Assemble the product in close proximity to where you intend to install it.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Risk of suffocation
Keep packaging materials away from children
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock!
- Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Check the product cord to be sure is free torn or frayed.
- WARNING: Wires must to be connected to low voltage driver and should not be connected
directly to live wire or a short may occur.
Cleaning & Maintenance
- On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
- Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade
Parts
Before getting, started, ensure the package contains the following components:
A
| |
x1
---|---|---
B
| |
x1
C
| |
x1
D
| |
x1
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>