Shenzhen Lanbaosi Technology M-XZ111-1 Live Microphone Instructions

INSTRUCTION

1. Keep the device in a good signal place.
2. Do not toss or throw the device to avoid causing damage.
3. Please regularly charge these devices, once a month when not in use.
4. Keep it dry and avoid a moisture environment.
5. Please contact customer service if the devices malfunction.
6. Do not disassemble it that may cause malfunction.

• Receiver1
• Transmitter2

• Storage Bag*1

wind muff*2
---|---|---|---

 Receiver

1. Phone/Camera port
2. Earphone port
3. 0n/Off
4. Charging/recording port
5.  Charging light(On when charging, off when not)
6. power Light
7. Connection Iig4On when connected)

 Transmitter

1.  Microphone port
2. Audio input port
3. SET FM button
4. On/Off(Single press. mute)
5. Volume+
6.  Volume-
7. Charging port
8. Charging light(On when charging, off when not)
9.  Microphone light(On when mute, twinkle when speaking )
10. Power Light
11. Transmission microphone
    • FM: Long press 2 seconds the FM button to enter FM model, then press + – Approaching receivers it will automatically change FM.

Connect phone to record and shoot videos.

• 1: Long press the “on” button to turn on the receiver and transmitter, they will “pair” automatically in 3 seconds. (Insert earphone can hear sound)

• 2. Connect phone and receiver by phone connection wire, then turn on phone camera to shoot video.

• 3. Clip transmitter to collar.(Use wind muff and transmission microphone as you need)

• 2. Record Background Music and Voice

1. Long press the ‘on* button to turn on the receiver and transmitter. they will “pair automatically in 3 seconds.

• “T-C” Type Phone
• 2. Insert camera connection wire to “AUX” of the transmitter, then conned audio adapter cable and ‘T-C” Type Phone, just play background music.

• “IP” Type Phone
• 2. Insert camera connection wire to “AUX” of the transmitter, then connect IP adapter cable and phone, just play background music.

• 3. Insert phone adapter cable and earphone to the receiver, then open IP device to record.

The ways to handle normal malfunctions

Phenomenons| Reasons| Ways
No Reactions| Wireless transmitters in OFF| Turn on the transmitters
Receiver is OFF| Turn on the receiver
Wrong wire connection in receiver| Please refer to the manual to connect them
No Sound| The indicator lights on transmitter sparkle/Off| Please charge the transmitter
Receiver is OFF| Turn on the receiver
Wrong devices connection| phone/camera correctly connected, ure them runs smoothly
The transmitter in a minimal volume| p the sound volume
Phone/Camera in a minimal volume| Turn up the sound volume
Abnormal Sound| The indicator lights on transmitter sparkle/Off| Please charge the transmitter
Audio input port wrongly| Please make sure the Audio input port is connected correctly
Harsh Sound| The transmitter and receiver are too close| Keep transmitter and receiver a distance
Noise When Turn on| Signal interference| Switch an FM to make sound clear
If the ways cannot solve what problem you have encountered, please contact our customers’ service.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>