SDC WDRBM Wood Door Reinforcement Box Installation Guide
- September 13, 2024
- SDC
Table of Contents
SDC WDRBM Wood Door Reinforcement Box
INSTALLATION INSTRUCTIONS
The most important elements for the proper installation of the Hi/Shear magnet assembly are the midpoint of the armature and the midpoint of the magnet must line up exactly. All Centerlines of the armature must line up with the respective centerlines of the magnet.
1561
- Lock Dimension: 8″ L x 1-1/2″ W x 1-5/8″ D
- Armature Dimension: 8-7/16″ L x 1-3/8″ W x 7/8″ D
1562
- Lock Dimension: 8″ L x 1-1/2″ x 1-1/16″ D
- Armature Dimension: 8-7/16″ L x 1-3/8″ W x 7/8″ D
- Voltage: 12vdc @ 650mA
- 24vdc @ 350mA
- WDRBM Dimension: 8-1/2″ L x 1-1/2″ W x 1″ D
MAGNET LOCK FRAME PREP
WDRBM WOOD DOOR PREP
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email engineer@sdcsecurity.com
Contact
- SECURITY DOOR CONTROLS
- WWW.SDCSECURITY.COM
- 800.413.8783
- 805.494.0622
- E-mail: service@sdcsecurity.com
- 801 Avenida Acaso, Camarillo, CA 93012
- PO Box 3670, Camarillo, CA 93011
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>