PROSOCOUSTIC WRP-Mini8-BK WAVEPro Mini Panels User Manual
- October 30, 2023
- PROSOCOUSTIC
Table of Contents
PROSOCOUSTIC WRP-Mini8-BK WAVEPro Mini Panels
INCLUDED ITEMS PER PANEL
RECOMMENDED ADDITIONAL INSTALLATION MATERIALS (Not Included)
General Guidelines
It is recommended to wear clean gloves to ensure fabric remains clean during
installation.
- Only handle the exterior sides of your WAVEPro panel to keep fabric taut.
- When cleaning, DO NOT VACUUM. Clean with a lint roller to ensure quality of fabric.
- Since wall materials vary, screws/accessories for fixing to the wall are not included. For advice on suitable screw systems, contact your local specialized dealer.
- Attach a Z-Clip to your WAVEPro Mini Panel by screwing the included Machine Screws into your preferred pre-drilled machine screw inserts (for vertical or horizontal placement). The part of the Z-Clip that lays flat against the panel should be on the top.
*If you purchased additional Z-Clips to add security to the bottom of the panel, repeat the process for the additional Z-Clip set. - Attach the remaining Z-Clip to the wall using the appropriate screws/wall anchors. The part of the Z-Clip that lays flat against the wall should be on the bottom. It is recommended to position Z-Clips on the wall using a laser/carpenterʼs level or chalk line to ensure an even install.
- Where possible, screw into a stud or other internal wall structure. 3. When all Z-Clips are installed, position your WAVEPro Mini Panel against the wall with the panelʼs Z-Clip slightly higher than the wallʼs Z-Clip, then slide the panel down until the clips are secure.
- For added security on a permanent installation, add a dab of RTV adhesive in the Z-Clip track before mounting.
WAVEPRO MINI PANEL DIMENSIONS
FABRIC REPLACEMENT
ProSoCoustic WAVEPro Mini Panels use a screen spline insert to hold fabric in
place and provide proper fabric tensioning. The inserted screen spline can be
taken out for easy replacement of fabric.
Replace fabric if:
- Old fabric becomes damaged over time
- A color change is desired
- You want a custom-printed image made to turn your WAVEPro Panel into art
ProSoCoustic offers the option to sew screen spline directly into the fabric
for an extremely simple fabric reinstallation. Safely store fabric in a
weather-resistant, clean area and change your WAVEPro Panelʼs aesthetic as
often as you want!
For more details, please visit
www.prosocoustic.com/videos
© 2022 ProSoCoustic. All Rights Reserved. ProSoCoustic is owned and operated
by Full Scale AV, a division of Techrep Marketing LLC.
Designed and Manufactured in North Canton, Ohio ProSoCoustic/Full Scale AV
701 Murfreesboro Pike, Suite 200
Nashville, TN 37210
www.prosocoustic.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>