ALLTERCO SNPL-00116US EC Type B Socket User Guide
- June 8, 2024
- ALLTERCO
Table of Contents
ALLTERCO SNPL-00116US EC Type B Socket
Read before use
This document contains important technical and safety information about the
device, its safety use and Installation.
Shell Plus PlugUS (the Device) by Allterco Robotics EOOD is a smart plug
suitable the controlling electrical household appliances and measuring their
power consumption. It can be plugged into standard IEC Type B sockets and
accepts standard IEC Type B plugs
CAUTION! Before using the device, please read this guide and any other
documents accompanying the Device carefully and completely. Failure to follow
the installation procedures could lead to malfunction, danger to your heart
and life, violation of the law or refusal of legal and/ or commercial
guarantee (if any). Allterco Robotics E.00D is not responsible for any loss or
damage in case of incorrect installation or in this guide
Introduction to Shelly
Shelly® is a line of innovative microprocessor-managed devices, which allow
remote control of electric appliances through a mobile phone, tablet, PC, or
home automation system. Shelly® devices can work standalone in a local Wi-Fi
network they can also be operated through cloud home automation services.
Shelly® devices can be accessed, controlled and monitored remotely from any
place the se has Internet connectivity, as long as the devices are connected
to a Wi-Fi router and the internet. Shelly® devices have integrated web
servers, through which the user can adjust, control and monitor them. The
cloud function could be used if it is activated through the web server of the
device or the settings in the Shelly Cloud mobile application. The use
register and access Shelly Cloud using either Android or iOS mobile
application, or with any internet browse at
https://my.shelly.cloud/.
Shelly® Devices have two Wi-Fi modes -Access Point (AP) and Client mode {CM)
To operate in Client Mode, a Wi-Fi router must be located within the range of
the device. Shell devices can communicate directly with other Wi-Fi devices
through HTTP protocol. An API is provided by Allterco Robotics EOOD For more
information, please visit
https://shelly-apl-docs.shelly.
cloud/#shelly-famlly-overvlew.
Control your home with your voice
Shelly devices are compatible with Amazon Alexa and Google Home-supported
functionalities. Please see our step-by-step guide on:
https://shelly.cloud/support/compatibility/.
Usage Instructions
CAUTION! The product is intended for indoor use only.
CAUTION! Protect the product from dirt and moisture! Do not use the product in
a damp environment!
CAUTION! Use the Device only with power grid and appliances which com- ply
with al applicable regulations. Short circuit in the power grid or any
appliance connected to the Device may damage it.
CAUTION! Do not connect to the Device appliances which exceed the given max
load!
CAUTION! Do not allow children to play with the device, especially with the
Power button. Keep the devices for re mote control of Shely (mobile phones,
tablets, PCs) away from children. Insert Shelly® Plus plugs into a power
socket without an appliance/load con nected to it. The LED will start flashing
with a blue light, indicating the Device is in AP mode. You can access the
embedded web interface at http://192.168.33.1 in the W-Fi network, created
by the Device (ShellyPlugUs-XXXXXXXXXXXX) use it to control the Device and
change its settings. You can now plug an appliance into the Device socket. and
To power the appliance on press briefly the Power button. The LED will turn
red. Press the Power button again to power off the appliance. The LED will
return to its previous status.
Initial Inclusion
If you choose to use the Shelly® Plus PlugUS with the Shelly Cloud mobile
application and Shelly Cloud service, instructions on how to connect the De-
vice to the Cloud and control it through the Shelly App can be found in the
“App Guide” included in the box.
LED Indication
- Blue flashing quickly: AP Mode
- Blue flashing slowly: Connected to a Wi-Fi network
- Blue still: Connected to Shelly Cloud
- Red still: Power supplied to the plugged appliance
- Red flashing slowly: Reboot initiated (Power button pressed for 5 sec.)
- Red flashing quickly: Factory reset initiated (Power button pressed for 10 sec.)
- Red and Blue flashing alternately: Firm ware update
Resets
Press and hold the Power button for 5 seconds to restart the Device. Press and
hold the Power button for 10 seconds to restore the Device factory settings.
Cleaning
CAUTION! Before cleaning the Device power off the connected appliance by pressing the Power button, unplug it and then unplug the Device itself. Never clean the Device, if it is connected to the mains! Use a wet soft cloth to clean the Device
CAUTION! Do not use aggressive detergents!
CAUTION! Do not immerse the Device or wash it under running water!
Disposal & Recycling
This refers to the waste of electrical and electronic equipment. It is
applicable in the US and other countries to collect waste separately. This
symbol on the product in the accompanying literature indicates that the
product should not be disposed of in the daily waste. Shelly Plus PlugUS must
be recycled to avoid possible damage to the environment or human health from
uncontrolled waste disposal and to promote the reuse of materials and
resources. It is your responsibility to dispose of the device separately from
general household waste when it is already unusable.
FCC Notes
- This device complies with Part 15 of the FCC Rules.
- Operations are subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification or change to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu lar installation. If this equipment does cause harmful interference to radio or television reception, which can be de- termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
RF warning for Mobile device:
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator your body.
Specifications
- Dimensions (HxWxD): 1.5×3.3×2.0 in
- Power supply: 120 VAC #10%, 60 Hz
- Electrical consumption: 2 W
- Max load: 15A
- Working temperature: 14°F to 104°F
- Radio protocol: WIFi 802.11 b/g/n
- Frequency Wi-Fi: 2400-2500 MHz;
- Radio signal power: 1 mW
- Operational range: up to 165 ft outdoors / 100 ft indoors
- SAR: 1.15W/Kg
- Scripting (JMS): YES
- MQTT/REST/UDP/TLS 1.2: YES
- COAP: No
- URL Actions: 20
- Scheduling: 50
- CPU: ESP32
- Flash: 4 MB
Manufacturer: Allterco Robotics EOOD
Address: Bulgaria, Sofia, 1407, 103 Cherni vrah Blvd.
Tel.:+359 2 988 7435
E-mail: support@shelly.cloud
Web: http://www.shelly.cloud
Changes in the contact data are published at the official website of the Manufacturer: http://www.shelly.cloud All rights to trademarks Shelly, and both er intellectual rights associated with this Device belong to Allterco Robotics EOOD.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>