ET2 E25142-CHK LED Pendant Basilica Instructions
- August 29, 2024
- ET2
Table of Contents
ET2 E25142-CHK LED Pendant Basilica
Specifications:
- Item/Model Number: E25142-CHK Basilica 1-Light LED Pendant
- 1 x E26 6W LED (Included)
- GENERAL 120V
Product Usage Instructions
Components:
Before starting, ensure the package contains the following components:
- A x1, G x1
- B x2, H x1
- C x1, I x1
- D x1, J x1
- E x3 (12″ STEM ESTR05012CHK-GM)
- F x3 (6″ STEM ESTR05006CHK-GM)
Wire Connections:
- Identify and connect the wires:
- Neutral Wire (N)
- Positive Wire (L)
- Ground Wire (Green Wire)
- Follow the wiring diagram:
FAQ:
-
Q: How do I install the Basilica 1-Light LED Pendant?
A: Follow the provided components list and wire connection instructions for successful installation. -
Q: What is the voltage requirement for this pendant light?
A: The Basilica 1-Light LED Pendant operates at 120V.
Item/Model Number: E25142-CHK
Basilica 1-Light LED Pendant
Please consult a qualified electrician prior to install
Before Getting Started
-
Read the instructions carefully prior to assembling the product.
-
When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
-
Carefully remove all packaging materials and retain for future use.
-
Keep all hardware parts and packaging out of reach of children.
-
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
-
Ensure that you have all required contents for complete assembly.
-
Take care when lifting. Assemble the product in close proximity to where you intend to install it.
-
Do not over tighten the screws and bolts as this may damage the threads.
-
Do not let children play with this product.
Risk of suffocation!
Keep packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
Caution there is a risk of shock!
- Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire. Check the product cord to be sure is free torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using tal powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
- Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
PARTS
Before getting,started, ensure the package contains the following components:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>