FORTIN THAR-TOY13 Harness For Toyota Lexus Installation Guide
- August 12, 2024
- FORTIN
Table of Contents
FORTIN THAR-TOY13 Harness For Toyota Lexus
Specifications
- Model: THAR-TOY13
- Vehicle Compatibility: Lexus UX250H Push-to-Start 2019-2024
- Compatible with EVO-ONE module
- Minimum Firmware Version: 79.66
Product Usage Instructions
- Ensure the vehicle is compatible with the THAR-TOY13 harness according to the specifications.
- Install the firmware version 79.66 or higher using the FLASH LINK UPDATER tool.
- Connect the wiring as per the THAR-TOY13 wiring connection guide.
- To program bypass options, use the UNIT OPTION feature.
- For remote starter programming, follow the instructions for R.S. OEM REMOTE STAND ALONE.
- It is mandatory to install the hood pin switch included in the package if the vehicle can be remotely started with the hood open.
- Set function A11 to OFF if the hood pin switch is installed.
- This module must be installed by a qualified technician to avoid permanent damage to the vehicle.
FAQ
- Q: Is the THAR-TOY13 harness compatible with all Lexus models?
- A: No, it is specifically designed for Lexus UX250H Push-to-Start models from 2019 to 2024.
- Q: Can I install the firmware without using the FLASH LINK UPDATER tool?
- A: No, it is recommended to use the FLASH LINK UPDATER tool for adding firmware versions and options.
- Q: What should I do if my vehicle’s OEM remote and SmartKey are not working after installation?
- A: Check the wiring connections and consult with a qualified technician for assistance.
Product Information
INSTALLATION HARNAIS THAR-TOY13
NOTES
- The vehicles OEM remote and SmartKey are still operable during remote start.
NO KEY TAKEOVER
MANDATORY INSTALL
NON-HOOD
- HOOD STATUS: THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, AND SET FUNCTION A11 TO OFF.
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
- THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
This guide may change without notice. See www.fortin.ca for the latest version.
WIRING CONNECTION
THAR-TOY13
DCRYPTOR PROGRAMMING PROCEDURE
Parts required (not included)
- BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
KEY BYPASS PROGRAMMING PROCEDURE 2/2
REMOTE STARTER PROGRAMMING PROCEDURE
- REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.
REMOTE STARTER FUNCTIONALITY
Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website regularly. We recommend that you update this module to the latest firmware and download the latest installation guide(s) before the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer-safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever of the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or in any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
TECH SUPPORT
- Tel: 514-255-HELP (4357)
- 1-877-336-7797
- www.fortinbypass.com