Logitech Z515 Wireless Speaker User Manual
- June 16, 2024
- Logitech
Table of Contents
Logitech Z515 Wireless Speaker User Manual
Connecting your Z515 Speaker with your iPhone or iPad
Your Z515 Speaker not only connects with your computer using the included USB
wireless adapter, but it also connects with your iPhone or iPad (or one other
Bluetooth® device).
To connect with your iPhone or iPad, please follow the instructions below:
-
Power on your Z515 Speaker.
-
Remove the USB wireless adapter from your computer’s USB
-
Simultaneously hold down the Volume Up and Volume Down buttons on the back of your Z515 Speaker for 10 seconds. The green wireless connection LED will begin blinking quickly
-
Power on your iPhone or
-
Select the Settings
-
Select the General
-
Select the Bluetooth menu, and ensure that Bluetooth is turned
-
Find the Logitech Z515 Speaker and select
-
Confirm that you want to connect the Z515 Speaker with your iPhone or iPad by selecting the Pair A confirmation window appears after you have selected the Z515 Speaker. There may be a slight delay so please wait.
-
Your Z515 Speaker is now connected with your iPhone or
-
Your Z515 Speaker will always connect to the last connected device. So the next time you turn on your speaker, it will connect to your iPhone or iPad if either unit was the last connected device, or it will connect to your computer if the USB wireless adapter was the last connected device.
Useful notes and tips
You can only connect your Z515 Speaker with one device at a time.
If the wireless connection is lost between your iPhone or iPad and your
speaker, you will need to follow steps 5 through 8 to re-establish the
wireless connection.
When switching from the USB wireless adapter in your computer’s USB port to
the iPhone or iPad, make sure to remove the USB wireless adapter from your
computer before attempting to connect to either the iPhone or iPad. Then
follow steps 5 through 8 above and select the Z515 speaker from the iPhone or
iPad device list.
When switching from the iPhone or iPad to the USB wireless adapter in your
computer’s USB port, ensure that your iPhone or iPad is completely turned off
or that the Bluetooth option is turned off from the iPhone or iPad settings
menu. Then plug the USB wireless adapter into your computer and turn on the
Z515 Speaker. The Z515 Speaker will automatically reconnect to the USB
adapter.
When your Z515 Speaker is connected to your iPhone or iPad, you must adjust
the volume through the controls on the Z515 Speaker.
The Logitech Z515 will pair with the USB wireless adapter and one other
wireless device (an iPad for instance). If you decide to pair an additional
wireless device to your Z515 Speaker, the previous pairing will be lost. The
pairing between the Z515 Speaker and the USB wireless adapter will never be
overwritten.