VOLT VAL-2049-35-4-BBZ Nano Integrated LED Brass Spotlight Instruction Manual
- June 13, 2024
- VOLT
Table of Contents
VOLT VAL-2049-35-4-BBZ Nano Integrated LED Brass Spotlight
Product Information
| Product Name | Luminaire |
|---|---|
| Intended Use | For installation in accordance with local codes and the |
National Electric Code (NEC)
Maximum Power Supply Rating| 300 watts (25 AMPS) at 15 volts
Package Contents| (1) Fixture Body, (1) Allen Wrench, (1) Stake
Product Dimensions| 0.5″ x 2.39″ x 0.45″
Product Usage Instructions
-
Before installing or servicing the luminaire, ensure that the power is turned OFF.
-
Ensure that all luminaires are installed at least 10 feet
(3.05M) away from pools, spas, or fountains to avoid the risk of electrical shock. -
Use a power supply (transformer) rated maximum of 300 watts (25 AMPS) at 15 volts with the luminaire.
-
Make wiring connections with UL listed wire connectors suitable for outdoor use.
-
Position the low voltage wire and wire connector within 6 inches (15.2 cm) from a building structure, luminaire, or fitting.
-
The main low voltage cable is intended for shallow burial, less than 6 inches (152 mm).
-
For safety, read and follow all instructions pertaining to a risk of fire or injury. Note that the lighted lamp can become hot.
-
Install the fixture body to the stake by passing the supply wire through the wireway slot on the stake and threading the fixture body onto the stake.
-
Insert the stake into the soil until the flange of the stake is flush to the ground.
-
Connect the leads from the luminaire pigtail to the main supply cable leads using two UL listed wire connectors (sold separately).
-
Adjust the direction of the luminaire by loosening the screw at the joint using the Allen wrench. Once the desired direction is achieved, tighten the screw.
ITEM : VAL-2049-35-4-BBZ
IMPORTANT : PLEASE READ BEFORE INSTALLATION
This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
These instructions do not intend to cover all variations in installation, operation maintenance or mounting situations.
- Make sure that the power is turned OFF before installing or servicing this luminaire.
- WARNING : risk of electrical shock. Install all luminaires 10 feet (3.05M) or more from pool, spa or fountain.
- This luminaire is intended to be used only with a power supply (transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.
- Wiring connections must be made with UL listed wire connectors that are suitable for outdoor use.
- Position the low voltage wire and wire connector so that it is located within 6 inches (15.2 cm) from a building structure, a luminaire or fitting.
- The main low voltage cable is intended for shallow burial – less than 6 inches (152 mm).
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS LIGHTED LAMP IS HOT!
WARNING: To reduce the risk of FIRE OR INJURY TO PERSONS.
- Turn off/unplug and allow to cool before reducing lamp.
- Lamp gets HOT quickly!
- Do not touch the hot lens, guard or cowl.
- Keep lamp away from materials that may burn.
- Do not touch lamp at any time.
- Use a soft cloth.
- Oil from skin may damage lamp.
- Do not operate the fixture with a damaged or missing lens or shield.
PACKAGE CONTENTS
- A. (1) Fixture Body
- B. (1) Allen Wrench
- C. (1) Stake
PRODUCT DIMENSIONS
INSTALLATION INSTRUCTIONS
-
INSTALL FIXTURE BODY TO STAKE
Pass the supply wire of the fixture body through the wireway slot on the stake. Thread the fixture body onto the stake.
-
INSTALL STAKE INTO SOIL
Insert the stake into the soil until flange of stake is flush to the ground. -
Wire Connections
Strip both the leads from the luminaire pigtail. Using two UL listed wire connectors (sold separately), connect the leads from the luminaire to the main supply cable leads.
-
Adjust Directions
By using the Allen wrench, loosen the screw at the joint and adjust the luminaire to the desired direction. Once the desired direction is achieved, tighten the screw.
1-813-978-3700 • Mon-Fri 8 am-8 pm • Sat-Sun 10 am – 6 pm (EST) Specifications and product details subject to change without notice. © Copyright 2023, VOLT® Lighting, Lutz FL USA 33549
All rights reserved. customersupport@voltlighting.com www.voltlighting.com