FORTIN MAZDA CX-3 Push to Start Installation Guide

FORTIN MAZDA CX-3 Push to Start

Specifications:

• Product Name: Immobilizer Bypass Module
• Vehicle Compatibility: Mazda CX-3 Push-to-Start 2016-2022
• Firmware Version: 85.[11]
• Unit Option: C1 – OEM Remote status monitoring

Product Usage Instructions

Installation Guidelines:
This module must be installed by a qualified technician to prevent any damage to the vehicle.

Ensure the following connections are made correctly:

• Connect (+)12V, (+)IGNITION1, CAN LOW, CAN HIGH, (+)ACCESSORY, and other relevant connections as per the manual.
• Ensure the hood pin switch is installed correctly for proper functionality.

Module Connection:
Before disconnecting any module or control unit from the vehicle, always disconnect the negative terminal from the vehicle’s battery to prevent any electrical damage.

Programming Options:
To add firmware versions or options, use the Flash Link Updater or Flash Link Mobile tool sold separately as per the instructions provided.

Safety Precautions:
It is mandatory to install the hood pin for safety purposes. If the vehicle can be remote started with the hood open, set function A11 to OFF.

FAQ:

1. Q: Can I install the module myself?
   A: No, this module must be installed by a qualified technician to avoid any potential damage to the vehicle.

2. Q: What happens if the hood pin is not installed correctly?
   A: Incorrect installation of the hood pin can cause permanent damage to the vehicle. It is a mandatory safety feature that must be installed properly.

Vehicle functions supported in this diagram (functional if equipped)

• Immobilizer bypass
• Lock
• Unlock
• Arm
• Parking Lights
• Tachometer
• Door Status
• Trunk Status
• Hand-Brake Status
• Foot-Brake Status
• OEM Remote monitoring

FIRMWARE VERSION

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

Program bypass option:

IF THE VEHICLE IS NOT EQUIPPED
WITH FUNCTIONAL HOOD PIN:

Hood trigger (Output Status).

Program bypass option
(Mandatory):

NOTES
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN.
A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
Parts required (Not included)
1X 10 AMP Fuse

**MANDATORY INSTALL

• HOOD PIN**

HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED
IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

ATTENTION
Before disconnecting a module, a computer or a control unit from a vehicle: Always disconnect the negative terminal from the vehicle’s battery.
In these vehicles, the factory keyless entry module is sensitive to interference and may cease to operate if some precautions are not taken. Disconnect the (-) terminal of the battery prior to disconnecting the connectors at the smartkey module below the steering wheel to avoid damage to the smartkey entry module.

Disconnect the (-) terminal of the battery.

1. Unscrew.
2. Unscrew
3. Onclip
4. Onclip

Make the following connections.

AUTOMATIC TRANSMISSION WIRING CONNECTION

Reconnect the (-) terminal of the battery.

DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

• 1x FLASH LINK UPDATER,

• 1x  FLASH LINK MANAGER
  SOFTWARE | PROGRAMME

• 1x Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet

• 1x  FLASH LINK MOBILE

• 1x  FLASH LINK MOBILE APP

• 1x  Smartphone Android or iOS with Internet connection
  (Internet provider charges may apply)

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector).

• The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

Release the programming button when the Blue LED is ON.
If the LED are not solid BLUE disconnect the 4-PIN Data-link harness (Black connector) and go back to step1.

Connect the required remaining harnesses.

Do not press the brake pedal. Press the
Push-to-Start button twice to turn ON the ignition.

• The Blue, Red and Yellow LEDs will alternatively illuminate.
  wait,

• The BLUE LED will flash rapidly.

Press the Push-to-Start button once to turn off the ignition.

• The BLUE LED will turn off.
• The RED and YELLOW LEDs will alternated.

KEY BYPASS PROGRAMMING PROCEDURE 2/2

Disconnect all the connectors and after the Data-Link (4-pins) connector.

Microsoft Windows Computer with  Internet connection*

Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.

OR

Smartphone (Internet provider  charges may apply)
Parts required (not included)

AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.

The module is now programmed.

REMOTE STARTER / ALARM VERIFICATION PROCEDURE
Test the remote starter. Remote start the vehicle.

REMOTE STARTER FUNCTIONALITY

All doors must be closed.
Remote start the vehicle.
Unlock the doors with either:

• The OEM remote
• The remote-starter remote

Enter the vehicle with the SMART-KEY.
DO NOT PRESS THE BRAKE PEDAL.

Wait for the orange led on the  Push-to-Start  button to turn on and off twice.
Press the brake pedal. The vehicle can now be put in to gear and driven.
If the Smart-Key is not detected the vehicle will shut down.

Module label
Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORTTECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797

ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>