FORTIN THAR-ONE-TOY16 Harness for Toyota Installation Guide

FORTIN THAR-ONE-TOY16 Harness for Toyota

Product Specifications

• Model: EVO-ONE
• Compatible Vehicles: Toyota Tundra Hybrid Push-to-Start 2022-2024
• Firmware Version: 88.[33]
• Manufactured After: 2019

Product Usage Instructions

Installation Requirements

To ensure proper installation and functionality, the following steps must be followed:

• Check compatibility with your vehicle model and year.
• Ensure the firmware version is up to date using the FLASH LINK UPDATER or FLASH LINK MOBILE tool.
• Program the unit options as per the provided instructions.
• Install the Hood Pin switch if required for remote start functionality.
• Follow the wiring connections guide for proper installation.

Installation Process

1. Identify the correct wiring connections as outlined in the guide.
2. Connect the required wires based on color codes provided.
3. Install the Hood Pin switch if necessary for remote start.
4. Secure all connections and ensure they are properly insulated.
5. Test the system to verify proper functionality.

Usage Instructions

Once installed, follow these steps to use the product:

1. Ensure the vehicle is in a safe and well-ventilated area.
2. Use the OEM remote monitoring system to control various functions like Lock, Unlock, Arm, Disarm, etc.
3. To remote start the vehicle, follow the specified temperature conditions for AUX.1 activation.
4. Always monitor the vehicle status using the provided indicators like Hood Status, Door Status, etc.

Frequently Asked Questions (FAQ)

Q: Can I install the product myself?
A: It is highly recommended to have the product installed by a qualified technician to avoid any damage to the vehicle due to incorrect connections.

Q: How do I update the firmware version?
A: Use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately, to add the latest firmware version and options to the module.

| Program remote starter option for COMFORT GROUP ACTIVATION :| FUNCTION| MODE| DESCRIPTION
---|---|---|---|---
39| 2| Temperature option : AUX.1 activated at 5oC, 5 seconds after remote started
NOTES
****| The vehicles OEM remote and SmartKey are still operable during remote start.

DESCRIPTION

| Program remote starter option:| FUNCTION| MODE| DESCRIPTION
---|---|---|---|---
34| 2| TRUNK OUTPUT: Pulse 2.5 Seconds
| 34| 3| Trunk output: Unlock before trunk pulse 0.5 sec

WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

1. Press and hold the programming button: Connect the 6-PIN Main harness (White connector). The LEDs will alternate between BLUE, RED,YELLOW & BLUE/RED flashes.

2. Release the programming button when the LED is BLUE.

If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1.

3. Insert the required remaining connectors.

4. Press the Push-to-Start button twice, to turn the ignition ON. The BLUE LED will flash rapidly.

5. Press the Push-to-Start button once to turn the ignition OFF. The BLUE LED continues to flash rapidly.

6. Press the Unlock button on the vehicule OEM remote.

   • The BLUE LED will turn ON solid.

7. Press the foot-brake pedal.

Press the Push-to-Start button until the engine start.
Release the foot-brake pedal.

  * The BLUE LED will turn OFF.
  * The RED LED will turn ON.  

8. Press the foot-brake pedal.

9. Press the foot-brake pedal.

Press the Push-to-Start button until the engine start.

  * The RED LED will turn OFF.
  * The YELLOW LED will turn ON.  

Wait,

  * The RED and YELLOW LEDs will alternate.  

Release the foot-brake pedal.

10. Press the Push-to-Start button once to turn off the engine.

11. Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.

12. Use the tool:
    FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
    *Parts required (not included)

13. AFTER DCRYPTOR PROGRAMMING COMPLETED
    Go back to the vehicle and reconnect the 6-Pin (Main- Harness) or the 4-pins (Data-Link) connector and after all the remaining connector.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THEMODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

Module label

WARNING

The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357) 1-877-336-7797
ADDENDUM GUIDE

www.fortinbypass.com
WEB UPDATE | MISE À JOUR INTERNET

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>