ESR 2B518 Qi2 Wireless Car Charger with CryoBoost HaloLock Instruction Manual
- August 9, 2024
- ESR
Table of Contents
Model: 2B518
2B518 Qi2 Wireless Car Charger with CryoBoost HaloLock
- HaloLock™ charging pad
- CryoBoost™ status light & vent
- USB-C port
- Air vent mount
- CryoBoost™ intake
LED Light Indicator Guide
Wireless Charging
Status| Power On & Standby| Charging| Fully Charged| Error
---|---|---|---|---
Light| Solid blue| Flashes blue| Solid blue| Flashes red
Fan| Rotates for 5 seconds and then stops| Rotates continuously| Fan
stops| Fan stops
-
If your phone isn’t charging, please check the following:
- Ensure your phone supports wireless charging and there are no foreign objects like metal, magnets, or credit cards on the back of the phone.
- Replace the car charger and check your phone. Then, reconnect the data cable and restart wireless charging to ensure proper function.
Important Notes
- Please use the included charging cable for the best results.
- The product’s input power is 9V 2.2A, with a maximum output of 15W. iPhones support up to 15W charging.
- For a more efficient charging experience, use a PD20W or higher fast charging adapter.
- This product is compatible with iPhones that support MagSafe technology. Use your phone bare or with an official Apple MagSafe case or ESR MagSafe case for the best magnetic alignment. Non-MagSafe phone cases should use the included magnetic ring.
Safety Warnings
- Do not store the product in temperatures below 32°F (0°C) or above 140°F (60°C).
- Do not throw the product into fire or water to avoid short circuits, electrical leaks, or damage.
- Inspect the product, charging cable, and other accessories for any damage before use. If you find any damage, stop using the product immediately.
- Do not disassemble or modify this product for any reason, as this may cause malfunctions, damage, and/or lead to the ingestion of disassembled parts by children.
- Avoid using the product in high-temperature, humid, or corrosive environments as this could cause serious damage and void the warranty.
- This product contains magnets. As such, it should be kept at a safe distance from medical devices such as pacemakers and defibrillators at all times so as to avoid interference. If no wireless charging is involved, a safe distance means at least 6 inches (15 cm); if wireless charging is involved, a safe distance means at least 12 inches (30 cm). If you suspect interference, discontinue use of the product immediately and consult a doctor and/or the manufacturer of the medical device immediately.
FCC ID: 2APEW-2B518
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator &your body.
IC: 24790-2B518
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
This equipment complies with IC RF radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 10
centimeters between the radiator and your body.
This product complies with the radio interference requirements of the European
Community.
Declaration of Conformity
This product is intended for use within Europe. Electronic Silk Road Corp.
hereby declares that this product 2B518 is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU,
2014/35/EU, 2014/30/EU.
The Declaration of Conformity for the 2B518 is available from www.esrgear.com
This symbol indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment.
ESR Qi2 Wireless Car Charger with CryoBoost (HaloLock)
Model: 2B518
Scan to watch a quick setup video
esrgear.com/faq/2c540
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>