Daske CSOW Scandy Washing Dryer Washing Instructions
- June 1, 2024
- Daske
Table of Contents
Daske CSOW Scandy Washing Dryer Washing
Mounting Instructions
- The image provides a visual guide for mounting a product, with instructions in German (DE), French (FR), and English (EN).
- The guide is divided into three main steps, each with corresponding illustrations and symbols.
Specifications
Component | Quantity |
---|---|
A (Screw) | x2 |
B (Bracket) | x2 |
C (Spring Washer) | x2 |
D (Washer) | x2 |
Step 1
- Align the bracket with the mounting holes on the top of the rectangular base. There are two brackets labelled as ‘A’ to be used in this step.
Step 2
- Prepare an electric drill with a screwdriver bit. The image shows a caution symbol indicating to be careful with the direction of the drill, and a prohibition symbol against using the drill without a drill bit. There are two screws labelled as ‘B’, two spring washers labelled as ‘C’, and two washers labelled as ‘D’ required for this step.
Step 3
- Use the electric drill to secure the screws ‘A’ through the brackets into the base. This step includes a detailed view showing the correct order of components on the screw: first the bracket ‘B’, followed by the spring washer ‘C’, and then the washer ‘D’ before the screw is inserted into the base.
Installation Instructions
FAQ
- What tools are needed for assembly?
- An electric drill with a screwdriver bit is needed.
- How many of each component are required?
- Two screws, two brackets, two spring washers, and two washers are required.
- Is there a specific order for the washers on the screw?
- Yes, first place the bracket, then the spring washer, and then the flat washer before inserting the screw into the base.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>