ESR ECW15 Shift Wireless Charger User Manual
- June 5, 2024
- ESR
Table of Contents
ESR ECW15 Shift Wireless Charger
OVERVIEW
Thank you for choosing ESR!
- Connect the charger to a power outlet
- A blue light indicates that the charger has been powered on.
- Place your phone onto the charger. A green light indicates that the phone is charging.
Product Specifications
- Model ECW15
- Input: DC 5V 2A, DC 9V 1.7A
- Output: DC 5V 1-1.5A, DC 9V 1.1A
- Power: 5W/7.5W/10W (MAX)
- Conversion efficiency: 70-80%
- Net weight 172 g
- Dimensions: 160 x 95 x 45 mm
Note on Charging
- When the charger is folded flat, your phone should be slightly offset from the center of the charger in order to charge properly.
- This charger cannot charge two devices at the same time.
Important Information
- To ensure your device charges quickly and efficiently, a QC 3,0 or PD-compatible adapter is recommended
- Please do not place metal objects or magnetic cards onto the charging surface, as they may interfere with charging or even damage the charger.
- If the charger overheats, remove your phone from the charger. Please wait for the charger to cool down before trying to charge again.
- Cases thicker than 5 mm may interfere with or prevent charging.
- Keep the charger away from water and other liquids.
Safety Infomation
- To avoid damaging the cable, please be careful when unplugging the charger
- Do not disassemble the charger or place it in fire or water, as this will damage the charger.
- Please do not expose the charger to high temperatures, high humidity, or corrosive substances, as they will damage the charger.
FCC ID: 2APEW- ECW15
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device. pursuant to Part 15 of the FCC Rules. These
limits are Limited
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to ty t correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio-tv technician for help.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator &your body.
IC: 24790-ECW15
This device complies with Industry Canada licence-exempt RSS standard( s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired. operation of the device
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>