ESR EFC0030 2-in-1 Wireless Charging Station User Manual
- June 5, 2024
- ESR
Table of Contents
ESR EFC0030 2-in-1 Wireless Charging Station
To ensure you understand how to correctly use this device, please carefully read this entire manual. Keep this manual for future reterence.
Product Overview
Module Information
- The charging station solits into 2 modules: the Appo Watch charging starrd and the wireless charging base.
- the stand can be unplugged and used with a standard USB-a port
- When the stand is removed the bases USB-A port can be used to charge other devices.
USB-A port has a max output of 5W
Apple Watch Charger Setup
- Requires the Apple Watch’s original charging cable (not included).
- Open the lid of the Apple Watch charging stand.
- Thread the Apple Watch charging cable (USB end first) through the front opening of the stand.
- Plug the cable into the stand’s internal USB port. Coil the cable then insert into the stand.
- Replace the lid and pushing the stand into the base.
Indicator Light Guide
The light only indicates the status of the wireless charging basc and not the
Applo watch charging stan0.
ChargingFully
Charging/Fully
- Charged
- Abnormality
- Detected
Charger Status
- Plugged in Stardby
- Indicator Light
- On for 5 sec
- Of
- On
- Floshing
Often abnormality is detected, please check the following
- Your phone supports wireless charging. your phone case is not thicker than 5 mm, and your phonc docs not havc any mctal attachments on thc back.
- Your charging adapter and cabe are compatible wth Quick Charge 3.0(OC 3.0) or Power Delvery (PD), A power output ot less than 18W may resut in slow or abnorma charging
- After checking the above, unplug and re-plug the charging cabe to resume normät chdrging.
Important Reminders
- Fast charging requires a QC 3.0 or PD 18W compatible charging adapter and cable.
- Please ensure your phone supports wireless charging.
- This charger is not compatible with phone cases thicker than 5 mm.
- Metal attachments on the back ot your phone will interfere with charging
- Please ensure thal yur AirPods charging case supports wireless charging
- This charger is not compatible with AirPods case covers thicker than 4 mm.
Safety Information
- Do not attempt to disassemble the device, expose it to an open frame, or u get vdedvoId Galnegg e devie
- Do nol Cxposc the dovice lo extremely hol, humid, or corrosive environments avoid damaging the device.
- always check for damage to the device, cables, or other accessories before usirng the device.i damaged, co not Use tne device.
- do not expose the device to corroSive liquids, as they will seriously damage the aevice ana Vola tne warranty.
- Do not attempt to disassemble or modity the device in any way, as t may cause serious damage and void tne warranty.
- Do not phce the device in temperatures bebw 0°C (32°F) or above 60°C (140°F).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>