cudy POE350 Wall Mount PoE Adapter Installation Guide

cudy POE350 Wall Mount PoE Adapter

Product Specifications

• Model: POE350
• Output Voltage: 56VDC
• PoE Power: 90W max
• Standard: IEEE 802.3af (15.4W)/at (30W)/bt (90W)
• Pin Polarity: 1/2(-)3/6(+), 4/5(+)7/8(-)
• Data Rates: 10/100/1000Mbps
• Input Power Requirements:
  • AC Input Voltage: 100 to 240 Vac
  • AC Input Current: 1A 100-240 Vac
  • AC Frequency: 50 to 60 Hz
• Dimensions: 178.5mm x 100mm x 46mm
• Indicators Connectors: System indicator: AC Power, User Indicator: Channel Power
• Protection: Over current protection, Overload protection, Overvoltage protection, Anti-interference protection
• Environmental Conditions:
  • Operating Temperature: 0 to 45°C, Maximum 80% Non-condensing
  • Storage Temperature: -20 to 70°C

Product Usage Instructions

Hardware Connection
Connect the PoE350 injector to the Powered Device (PD) such as an IP Camera, Wireless AP, or Smart VoIP device using the provided Ethernet cable.

Physical Appearance
Plug the PoE350 into the power socket and connect the Ethernet Device (switch, router, etc.) using the appropriate ports.

LED and Interface Explanation
The LED indicators on the PoE350 show the power output levels (30W, 60W, 90W) and the status of the AC Socket and PoE/DATA ports. Ensure proper power input range (100-240VAC) for the PoE injector to function correctly.

Frequently Asked Questions (FAQ)

What should I do if the PoE output power is 0?
Check the power input to the PoE injector and ensure it is within the specified range of 100-240VAC. Verify proper connections and troubleshoot any issues with the Powered Device.

Hardware Connection

Physical Appearance

LED and Interface Explanation

• PWR PoE injector got 100-240V power input
• 30W When the PoE output power is 0<P≤30W, LED lights up
• 60W When the PoE output power is 30<P≤60W, LED lights up
• 90w When the PoE output power is 60<P≤90W, LED lights up
• AC Socket Connect with AC cable
• PoE/DATA Connect to the camera with UTP cable CAT5E or CAT6 supply power
• DATA/IN Connect to the Ethernet device with CAT5E or CAT6 UTP cable to transmit data

Specifications

• Model POE350
• Output Voltage 56VDC
• PoE Power 90W max
• Standard IEEE 802.3af (15.4W)/at (30W)/bt (90W)
• Pin Polarity 1/2(-)3/6(+),4/5(+)7/8(-)
• Data Rates 10/100/1000Mbps
• Input Power Requirements
  • IAC Input Voltage: 100 to 240 Vac
  • AC Input Current: 1A 100-240 Vac
  • AC Frequency: 50 to 60 Hz
• Dimensions 178.5mm x 100mm x 46mm
• Indicators Connectors:
  • System indicator: AC Power
  • User Indicator: Channel Power
• Connectors Shielded RJ-45, EIA 568A and 568B
• Protection:
  • Over current protection
  • Overload protection
  • Overvoltage protection
  • Anti-interference protection
• Environmental Conditions:
  • Operating Temperature: 0 to 45°C, Maximum 80% Non-condensing
  • Storage Temperature: -20 to 70°C

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

EU declaration of conformity

• Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The original EU declaration of conformity may be found at http://www.cudy.com/
• For support and warranty, please visit: http://www.cudy.com/. Specifications are subject to change without notice. Cudy is a registered trademark of Shenzhen Cudy Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.Copyright©2022 Shenzhen Cudy Technology Co., Ltd. All rights reserved.
• EU Address: Otto esser 2c, 65451 Kelsterbach, Germany

References

• Cudy, Your Home and Business Networking Solutions Provider

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>