ESR 6B003 Rebound Magnetic Keyboard Case User Manual
- June 5, 2024
- ESR
Table of Contents
REBOUND MAG NETIC KEYBOARD
CASE
Model: 6B003
6B003 Rebound Magnetic Keyboard Case
User Manual
Pairing Mode Hold for 3 seconds and enter pairing mode, If not connected after
3 minutes pairing mode will turn off.
Auto Reconnect When turned on, the keyboard will automatically attempt to
reconnect with the last paned device for S seconds.
Power Light Charging:
Overview Fully charged:
Low battery:
Standby Mode Backlight FectoryReset She keyboard backlight will tum off
automatically after 1 minute of activity. Me r 10minutes of activity, the
keyboard will enter standby mode.
Press any key to wake the keyboard
Press to select backlight brightness (bright medium, low, off). to select the
backlight color (7 colors).
Press and hold seconds.
The three lights will flash simultaneously to indicate a successful reset
Shortcut Keys:
Troubleshooting Guide
If the keyboard stops working, please check the following:
- Ensure the keyboard is switched on.
- If the keyboard is out of battery, charge the keyboard.
- If the connection’s unstable, tum the keyboard off and wait 10 seconds before turning it back on.
If the problem persists unpair the keyboard by going to Settings > Blue-nth > Device List > “ESR KEY 66003” and ****, then choose “Forget This Device” Follow the Bluetooth pairing instructions to reconnect your keyboard
If the keyboard remains unresponsive, repeat the above steps. If you are still expending problems, contact our customer service eatgear.com/contact- us/
Reminder
This Bluetooth keyboard has a rechargeable battery. When not using the keyboard for an extended period of time tum the keyboard off using the power switch to prolong battery life
FCC D 2APEW- 6E3003
This device complies with part 15 of the FCC Rules Operation i s subject to
the following two conditions (1) This device may not cause harmful
interference, and (2)this device must accept any interference received,
including interference that may cause undesired operation Warning: Changes or
modifications to this unit not expressly approved by the party responsible for
compliance could voi t he user’s authority to operate the equipment
NOTE This equipment has been tested and found to comply with the limits
or a Class B digital device, pursuant to Part 15 of the FCC Rules These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions may cause harmful interference to radio communications, However.
there is no guarantee that interference will not occur in a particular
installation, If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged totiyto correctthe interference by one or more of
the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.