EVOHEAT HiTemp WiFi App User Manual
- June 3, 2024
- EVOHEAT
Table of Contents
EVOHEAT HiTemp WiFi App User Manual
User Privacy
We take your privacy very seriously, user’s private data, such as contact details, addresses and other private information will require your permission before being uploaded to the cloud; we work hard to protect your data security.
Description
- Receive data signal from cloud server and transmit to the main device;
- Receive data signal from main device and transmit to cloud server;
- To achieve remote upgrade the WIFI module baseplate MCU by cloud server;
- To achieve the remote upgrade of the main device by WIFI module baseplate MCU
Technical Parameters
OPERATING VOLTAGE : DC8V~12V (Recommended value 12V)
OPERATING CURRENT : Max. recurrent peak 1A, average standby current 50mA
TEMP. RANGE : Operating Temp.: -30℃~+70℃; Storage Temp.: -40℃~+85℃
LED INDICATOR LIGHT : 4 lights, Network configuration indicator, router
connection indicator, cloud server connection indicator, 485 communication
indicator;
DIMENSION(L×W×H) : 78mm×63mm×24mm
Installation
There is a magnet on the back of the WIFI module. It can be installed indoors or outdoors but should avoid direct sunlight.
Scan one of the following QR codes according to your phone’s operating system to download the App (Or search ‘HiTemp’ on your phone’s application store):
Google Play Store
HiTemp App
Apple Store
Functional Description
Account Login
Use an email address and password to register, login to the app or reset the password.
-
Account Registration: To register an account, click ① to jump to the Account Registration interface, fill in the relevant information and click ② to receive verification code. While completing the application information, click ③ to read the details of the Privacy Policy, click ④ to agree, and click ⑤ to complete registration. Please note, the verification code is only valid for 15min, if you surpass this you will need to request another.
-
Log in: Follow the instructions on the login page and enter your registered email address and password, click ⑥
and jump to device list; -
Forgot Password: If you forget your password, click ⑦, jump to the Forgot Password interface (Fig.3 ). Follow the instructions on the page, fill in the relevant information, then click ⑧ to receive a verification code to your mailbox, click ⑨ to confirm and password reset is done.
Add Device
Add Device After login, the app will take you to the ‘My Device’ interface. Follow the instructions to add Wi-FI or DTU:
Wi-Fi Configure Network
- Follow the instructions on the page (Fig.7), press and hold the button on the module for 1 second until two lights are on (meaning the AP connection is activated), click ⑩ to confirm, click ⑪ to turn the page;
- Click ⑫ to enter the WIFI password for the current connection, click ⑬ to confirm;
- Jump to system settings and connect specified WIFI, click ⑭ to select the “Smart_AP_xxx”, click ⑮ to popup window(Fig.10), follow the instructions and then jump to WIFI setting interface(Fig.11);
- Slide the page back to configure network interface (Fig. 12), click ⑯ to enter the next stage.
5. To join the WLAN Network, click ⑰ (Fig. 13); click ⑲ to bond device (Fig.
14);
6. Press ‘Confirm’ to allow the app to use the camera for scanning the
Barcode on your unit. Then, scan the unit’s barcode.
7. Press ‘Confirm’ again to complete device bonding. Head back to the main
interface (Fig. 18).
Device Management
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>