NOTIFIER STI Steel Web Stoppers Detector Covers Instruction Manual

: June 9, 2024
: NOTIFIER

Table of Contents

General
Features
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

STI Steel Web Stoppers Detector Covers
Instruction Manual
STI Steel Web Stoppers
Detector Covers

General

STI Steel Web Stoppers are a simple, tough, low cost, easy-to install protective cover for smoke and heat sensors where damage to the device may occur. They are especially appropriate for areas where physical abuse to detectors is great, such as correctional facilities and public buildings in high-crime districts. Their strong, durable, womblike design and construction of 3/16” steel wire permit the Stoppers to take tough knocks in stride. Their open design allows unrestricted airflow to the fire alarm sensor, so that no change in the device application or spacing is required.

Features

Two models (one for high-profile and one for low) fit virtually all smoke detectors, while a third model fits heat detectors (both rate-of-rise and fixed).
L.E.D. indicator on detectors remains visible. Easy installation and easy removal for servicing detectors.
Aesthetically appealing.
Same positioning of installation holes as Still’s polycarbonate Smoke Detector Damage Stoppers — thus they are interchangeable.
Construction of 3/16″ steel wire in a womblike, octagonal shape is extremely difficult to break.
Easy installation.
Optional surface mount models.

Agency Listings and Approvals
These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.

UL Listed: S3504
CSFM: 7300-1416:100
MEA: 49-00-E

Product Line Information
DETECTOR COVER
STI9601: Low-profile smoke detector guard.
STI9609: High-profile smoke detector guard.
STI9604: Heat detector guard.
SURFACE MOUNT MODELS
STI9602: Low-profile smoke, surface mount guard.
STI9605: High-profile smoke, surface mount guard.
STI9610: Heat detector, surface mount guard.

Miscellaneous

A damaged smoke detector or heat detector could make an entire fire alarm system inoperable and negate the early warning response for which it was intended. To maintain
critical credibility, it may be necessary to install a physical guard to prevent damage by accident or vandalism. STI’s Steel Web Stoppers do exactly that.
NOTE: These devices should only be used in areas where abuse of smoke detectors or heat detectors is causing false fire alarms or high maintenance costs.

Notifier® is a registered trademark of Honeywell International Inc.
©2010 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited.

This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
For more information, contact Notified.
Phone: 203-484-7161, FAX: 203-484-7118.www.notifier.com
firealarmresources.com