Sunlover SUG Underground Blanket Roller Box User Manual

: June 12, 2024
: Sunlover

Table of Contents

Provide protection and longevity to your pool blanket
DIMENSIONS
INSTALLATION
WARRANTY
TECHNICAL AND AFTER SALES SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Sunlover SUG Underground Blanket Roller Box User Manual

Provide protection and longevity to your pool blanket

The underground roller system discreetly hides your pool cover, delivering a sleek and contemporary appearance that seamlessly integrates with the pool’s surroundings.

It is important that you read through the manual to identify the key areas you need to understand, particularly the following:

Health and Safety Concerns
Installation requirements
How to operate the major features of the unit
The importance of maintenance
If you have a problem, what you can do to trouble shoot before you contact your pool professional
Your entitlements under the product warranty

IMPORTANT
We strongly recommend that a pool or landscape professional install this product to ensure proper installation.

While the lid can support up to 200kg of direct weight, please be aware that the aluminum material has the potential for heat build-up and can become hot to walk on. We recommend taking precautions to avoid direct contact with the lid surface.

DO NOT MACHINE COMPACT AROUND THE COVER BOX
DO NOT ACID WASH NEAR THE LID

WHILE EVERY EFFORT HAS BEEN MADE TO ENSURE THAT THE INFORMATION CONTAINED IN THIS MANUAL IS ACCURATE AND COMPLETE, NO LIABILITY CAN BE ACCEPTED FOR ANY ERRORS OR OMISSIONS.

SUNLOVER RESERVES THE RIGHT TO CHANGE THE SPECIFICATION OF THE PRODUCTS DESCRIBED HEREIN AT ANY TIME WITHOUT PRIOR NOTICE.

Please note: This manual has been designed to cater for installation rules and codes in Australia.

DIMENSIONS

END VIEW
Compact Underground

Dimension
Underground Standard

TOP VIEW

SIDE VIEW

3D VIEW

INSTALLATION

STEP 1
Prior to digging it is crucial that the headers have been installed. Headers are the coping or cap on the edge of the Swimming Pool
Headers determine the positioning or placement of the Underground Blanket Box (UBB)

STEP 2
Dig and check that all pipes and cables are not in the way of where the UBB will be installed.
This should be specified to pool builder prior to construction of your pool.
Installation

STEP 3
Measure width of pool and allow 150 to 200mm either side so that the blanket can retract on the UBB without getting tangled.

Also as a guide measure 300 to 400mm (or the width of the pavers that would go in between) from the header to the lid.
Dimension

STEP 4

Dig a hole that’s approximately
600mm deep
600mm wide
Add 200mm to the length of the UBB

This is so that the UBB has enough room to moved and adjusted if needed.
Dimension
STEP 5
Place UBB into the hole ensuring the lid opens in the correct direction. Also check that lid height is level with finished floor level and box is parallel to the pool headers.
Installation
STEP 6
Back fill both ends of box approximately 100mm deep. Using a hose, water both ends to ensure compaction. Double check all measurements and levels to ensure box has not moved.

STEP 7
Use rapid set concrete and pour down the braces to help lock the UBB into position.
Proceed to back fill to complete installation.

STEP 8
Ensure all sand and debris is removed from lid and cover it to protect it.

STEP 9
If the blanket is cut to size, open the lid, extend straps and hook it up to the eyelets

Checklist

Drainage holes drilled in floor
Screws connecting floor and walls
Gearbox turning and keyway inserted
Adequate number of straps attached
Straps and clips assembled correctly
Screws in tubes are located into each plastic slug
Lid stands are attached and tighten
Adequate number of hinges and evenly spaced
Aluminium side plate screwed to rails
Lid and rail are square and have correct gaps
Lid and rails are free from scratches and marks
Braces tightened and are spaced correctly
Braces have adjustment bolts
Lid spacers are fitted
Handle and handle hooks fitted
Add stickers

WARRANTY

Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure

The Sunlover Underground Blanket Box is covered against manufacturer defects for: