FOCAL VESTIA Center Channel Speaker User Manual
- June 1, 2024
- FOCAL
Table of Contents
FOCAL VESTIA Center Channel Speaker User Manual
VESTIA CENTER
Warning symbol. This symbol is designed to warn the user of the presence of important instructions mentioned in the user manual and relating to the handling, operation and maintenance of the device.
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Only use attachments/accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. -
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
When using the device, the ambient temperature should not exceed 95°F (35 degrees Celsius).
-
Do not use this device in tropical climates.
-
Do not place naked flame sources, such as lit candles, near the device.
-
The appliance should only be mounted on a wall or ceiling if the manufacturer allows for this.
-
This product has sharp corners.
Handle it with care. -
Do not attempt to repair this device yourself. Opening the device may be dangerous. Contact a qualified professional for all work on the device.
-
When replacement components are needed, use only the components specified by the manufacturer or components with identical technical features to those of the original product.
Using non-compliant components could cause fires, electric shocks or other risks. -
After any maintenance or repair work on the device, test it to check that it is working safely.
-
Turn the source to minimum before connecting the products and turning up the volume. Once the products are in place, gradually increase the volume to a reasonable and comfortable level.
-
To avoid damaging your hearing, do not listen to loudspeakers at high volumes for long periods of time. Listening to loudspeakers at an excessive volume can cause damage to the user’s ears and may lead to hearing problems (temporary or permanent deafness, buzzing in the ears, tinnitus, hyperacusis). Exposing your ears to a volume higher than 85dB SPL-LAeq for several hours can irreversibly damage your hearing.
-
After removing the product from its packaging, keep the packaging out of the reach of children. It could present a suffocation risk.
-
Some users who are not self- sufficient enough to use the product on their own without danger. In particular, children under 14 or people with some types of disabilities must be supervised and/or accompanied when using the device.
Please validate your Focal-JMlab warranty, it is now possible to register your product online: www.focal.com/warranty
Thank you for purchasing a Focal product. Welcome to our High-Fidelity world.
Innovation, tradition,
excellence and pleasure are our values; our one and only aim is to bring you a
sound that is rich, pure and
true. To get the most out of your product, we recommend that you read the
instructions in this booklet,
then store it in a safe place to refer to in the future.
Grilles (fig. B)
The Vestia loudspeakers are supplied with grilles to protect the speaker
drivers. They are easy to fit or remove thanks to their magnetic attachment
system.
We advise removing them when you are listening to music to get the best
performance from your loudspeakers.
Connections (fig. C)
Vestia connectors provide reliable, multi-purpose contacts for stripped cables
(up to 3/16” – 4mm diameter), fork terminals or banana connectors. It is
imperative that you respect the polarity of the loudspeakers. The connector
marked “+” must be connected to the positive output on the amplifier, and the
connector marked “-” must be connected to the negative terminal. Stereo image
and bass perception will be seriously compromised if these conditions are not
respected. Choose good quality cables with a cross-section appropriate for
their length: your dealer will be able to advise you.
Recommendations for use
The way the loudspeakers behave depends on the room’s acoustics, the correct
positioning of the loudspeakers within the room and the listener’s location.
You can tweak each of these elements to correct or improve a desired effect.
The sound is harsh, aggressive: your room’s acoustics are probably too reverberant. Consider using sound-absorbing materials (rugs, sofa, wall coverings, curtains, etc.) and sound-reflecting materials (furniture) to absorb or diffuse resonance.
The sound is “flat”, strangled: there are too many sound-absorbing materials in the room; the sound is soaked up and has no depth. Aim for a better balance between the absorbent and reflective materials within your room.
In general, aim to have a reflective wall behind the loudspeakers so that the
sound develops correctly.
The wall behind the listening area, meanwhile, will ideally be absorbent to
prevent rear reflections from “contaminating” the perception of the stereo
image. Furniture can be placed judiciously on the side walls to diffuse the
sound waves and therefore ensure certain frequency ranges are not excited,
particularly in the midrange (suppression of flutter echoes).
Positioning the Vestia Center (fig. A, D, E)
The central loudspeaker should be placed close to the screen for realistic
dialogue reproduction. It can be placed beneath the television if the TV unit
allows this.
If a standard projection screen is used, the central loudspeaker must be
placed below the screen for optimum results. (fig. D)
If a micro-perforated screen is used, it can then be placed behind and towards
the lower half of the screen.
If positioning the loudspeaker on a furniture unit, make sure you stick on the
silicone feet before installation.
You can also add the rubber base beneath the loudspeaker, in the space
provided, to tilt the loudspeaker backwards and thereby slightly lift the
soundstage. (fig. A)
Break-in period
The speaker drivers used in Vestia loudspeakers are complex mechanical
components which require a certain time to adapt to operate at their best and
to become acclimatised to the temperature and humidity of the listening
environment. This break-in period varies depending on the climate and may last
a few weeks. To reduce the break-in period, we recommend operating the
loudspeakers for approximately twenty consecutive hours. Once the
loudspeakers’ characteristics have totally stabilised, you will be able to
enjoy your Vestia loudspeakers’ performance to the full.
Special precautions
The only maintenance required for the Vestia loudspeakers is dusting with a
dry cloth. If your
loudspeaker becomes dirty, we recommend simply cleaning it with a damp cloth.
Never use solvents, detergents, alcohol-based or corrosive products, scrapers
or scourers to clean the surface of a loudspeaker.
Keep the loudspeakers away from sources of heat.
Choosing the right amplifier
It is not an excess of amplifier power that can damage your loudspeakers and
speaker drivers but a lack of power. Moreover, if the volume is turned up too
high, the amplifier saturates and generates parasite signals that may damage
the tweeter. The dynamic capacity and definition of Vestia loudspeakers are
sufficient to reveal the strengths and weaknesses of whatever amplifier is
connected. Your retailer will be able to help you choose the amplifier best
suited to your tastes and budget.
Conditions of warranty
All Focal loudspeakers are covered by warranty drawn up by the official Focal
distributor in your country.
Your distributor can provide all details concerning the conditions of
warranty. Warranty cover extends
at least to that granted by the legal warranty in force in the country where
the original purchase invoice was issued.
Correct elimination of this product.
This marking indicates that within the EU this product should not be disposed
of with other household wastes. To prevent any risk to the environment or
human health, please recycle them responsibly to encourage the reuse of
material resources. To return your used device, please use the return and
collection systems available, or contact the retailer where you purchased the
product. They can recycle this product safely.
Scan QR code for information on packaging disposal
Focal-JMlab® – BP 374 – 108, rue de l’Avenir – 42353 La Talaudière cedex –
France – www.focal.com
Tel. (+33) 04 77 43 57 00 – SCLC – 28/11/2023 – v2
References
- Top-of-the-range speakers and hi-fi equipment | Focal
- Extension de garantie | Focal
- Se connecter à focal-naim
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>