MTSIM MTS Mouse Monstertech Instruction Manual
- June 13, 2024
- MTSIM
Table of Contents
MTSIM MTS Mouse Monstertech
Product Information
| Part | Quantity | Dimensions (mm) | Color |
|---|---|---|---|
| MTS MOUSE | 1 | N/A | N/A |
| Universal Connector | 4 | N/A | N/A |
| Bracket (Left or Right) | 1 | N/A | N/A |
| Slot Nut M6 | 2 | N/A | N/A |
| Slot Nut M8 | 9 | N/A | N/A |
| M8x30 Screw | 4 | N/A | N/A |
| M8x14 Screw | 2 | N/A | N/A |
| M6x18 Flat Head Screw | 2 | N/A | Black |
| M8x10 Set Screw | 1 | N/A | N/A |
| Foam Pad | 1 | N/A | N/A |
Product Usage Instructions
- Assemble the MTS MOUSE according to the provided diagram in the manual.
- Ensure that the universal connector is pre-assembled and positioned in the middle under the mouse plate.
- Use the hex-key with ball head to tighten the components as necessary.
- Slide the assembled MTS MOUSE upside down and attach the pre-assembled universal connectors using the provided screws.
- Attach the left or right bracket as ordered to the respective side of the MTS MOUSE.
- Loosely fasten the star knobs to allow swiveling of the MTS MOUSE.
- To adjust the position, swivel the MTS MOUSE to the desired angle and then tighten the second star knob.
- Slide the MTS MOUSE down until it touches the profile and then tighten the green-marked screws.
- To remove the mouse, loosen the star knob located on the underside of the MTS MOUSE.
Note : Refer to the provided manual for detailed diagrams and additional information.
PARTS
[dimensions in mm / different scales] No extra or spare parts listed
BAG 1
BAG 2
ASSEMBLY
OPERATION
Read User Manual Online (PDF format)
Loading......